Efektivitas Mesin Simpac Small Stamping 300 T dengan Metode Overall Equipment Effectiveness di PT. XYZ

Riska Apriyanti; Wahyudin Wahyudin

doi:10.37090/indstrk.v8i1.1031

Authors

Riska Apriyanti Universitas Singaperbangsa Karawang
Wahyudin Wahyudin Universitas Singaperbangsa Karawang

DOI:

https://doi.org/10.37090/indstrk.v8i1.1031

Abstract

The machine is the main component in carrying out the production process. Maintenance of production process facilities is an activity to support smooth production. The production process facility in the form of a machine is maintained in the same condition as when it was new or reasonable conditions to carry out operations, when the machine is damaged the production process will be affected and the most fatal process production process stopped Problems at PT. XYZ is a machine that often experiences downtime, after direct observation of problems at PT. XYZ must use the Overall Equipment Effectiveness method to determine the overall effectiveness of equipment with this method the problems of downtime, loss time, cycle time, defects, operation time, and loading time will be known how long the ineffectiveness is, Based on the January 2023 values of 90%, February 90%, and March 84%, and performance calculations in January 99%, February 64%, and March 100%, but in these three months it has not met the international standard in OEE of 85%.

Keywords: Down Time, Efektivitas, Loss Time, Overall Equipment Effectiveness

References

Alhilman, .. A. (2017). Software Aplication for Maintenance System A Combination of Maintenance Metdhods in printing Industry .

Ansori. (2013). ANALISIS TOTAL PRODUKTIVE MAINTENANCE (TPM) PADA STASIUN . jural teknik industri, 61.

Boris, S. (2006). Total Productive Maintenance. Fronties E-books.

Candra Setia Bakti, h. k. (2019). ANALISA PRODUKTIVITAS SISTEM. jurnal ilmu telnik dan komputer.

Davis, R. (1995). Productivity Improvement Trough TPM. .

Haidar, G. S. (2019). analisis efektivitas mesin injection molding di bagian produksi PT. dian megah indo perkasa menggunakan metode overall equipment effectivenes dan faul tree analysis . inaque , 3.

Hartman, E. (1992). Successfuly Installing TPM in a NonJapanese Pant. Pittsbrugh, PA, TPM Press,inc.,. inggris: Pittsburgh, Pa.

Heizer. (2010).

Lestari, A. (2021). analisis efektivitas mesin pada stasiun ketel dengan menggunakan metode oee di pt.xyz. Journal of industrial engineering and management , 36-47.

mustajib, N. A. ((2013). sistem perawatan terpadu (Integrated Maintenance System),. Edisi Pertama, Yogyakarta. yogyakarta: Graha Ilmu.

Nakajima, S. ((1988). Introduction to Total Productive Maintenance (TPM). Universuty Of minnesota: Productivity Press.

Nurdin, F. F. (2023). Peningkatan Produktivitas Peralatan dan Perawatan Mesin Total . Saintek, 389.

Prabowo, R. H. (2020). Total Productive Maintenance (TPM) ppada perawatan mesin grinding menggunakan metode overall equipment effectiveness (OEE). jurnal industrial Servicess, 5, 207-211.

Rahmad, P. S. ( 2012). Penerapan Overall Equipment Effectiveness (Oee) Dalam Implementasi Total Productive Maintenance (TPM). jurnal rekayasa mesin , 431-437.

Rosalina, I. (2012). efektivitas program nasional pemberdayaan masyarakat mandiri perkotaan pada kelompok pinjaman. jurnal efektivitas pemberdayaan masyarakat, 01, 3.

S, N. (1998). Introduction to TPM Total Productive Maintenance,. Cambridge: Productivity Press, Inc,. inggris: Ios Press.

Sari, F. &. (2016). Analisis Produktivitas Mesin Buffing Menggunakan Metode Overall Equipment effectiveness. Jurnal Ilmiah Wahana Pendidikan, 95.

Sundari, Susanti and Wahyono, H. (2020). PENGUKURAN PRODUKTIVITAS MESIN TETAS TELUR DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) DI PT. MALINDO FEEDMILL. Tbk.

Waqas, M. (2013). Measuring performance of mining equipment used in cement industry by using overall equipment effectiveness (OEE). Doctoral dissertation, MSc. Thesis, Departement of mining engineerimg, University Of Engineering & Technology, Lahore, Pakistan, 212.