Analisis Pengendalian Kualitas Menggunakan Metode Statistical Process Control (SPC) Pada Part Lever Comp Throttle Di PT.OMI

Dira Santana; Fahriza Nurul Azizah

doi:10.37090/indstrk.v8i1.1179

Authors

Dira Santana Universitas Singaperbangsa Karawang
Fahriza Nurul Azizah Universitas Singaperbangsa Karawang

DOI:

https://doi.org/10.37090/indstrk.v8i1.1179

Abstract

PT. OMI is a company that operates in the automotive industry in the Karawang area, the goods it produces are very varied and have quite a lot of customers. To increase customer trust, customer satisfaction is the most important thing, with the aim of knowing the process and quality results of a product by using a p-control chart and knowing the various types of defects that occur in the product. The research uses data collection methods in the form of production data as well as product defect data produced and data processing using p control charts and Minitab software to analyze the causes of types of defects and provide suggestions for companies. The results of production quality control in 2022 samples were obtained CL (Middle limit) is 0.0077%, LCL (Lower limit) is 0.0074% and UCL (Upper limit) is 0.0080%. From the analysis, there are 3 types of defects, namely color defects at 48%, chip defects at 40%, and finally burry defects at 12%. Problems occur due to several causes such as human factors, machines, methods, and materials. To solve these problems, a fishbone diagram was created. Product control at PT OMI is under controlled conditions.

Keywords: Control Chart, Defect, Quality

References

Azizah, F. N., & Insani, W. F. (2002, April). Analisis Pengendalian Kualitas Produk Dengan SK 150 ML Dengan Metode Statistical Quality Cobtrol (SQC) Di PT Prima Kemasindo. Jurnal STRING (Satuan Tulisan Riset dan Inovasi Teknologi), 6(3), 217-226.

Deming, E. W. (1982). Guide to Quality Control . Cambridge: Massachussetts Insitute Of Technology .

Desiana, C., & Adistana, G. Y. (2022). Analisis Pengendalian Kualitas Produk Floordeck Dengan Menggunakan Metode Statistical Process Control (SPC) Pada PT. Mulcindo Steel Industry. Jurnal Teknik Sipil, 1-10.

Gaspersz, V. (1997). Mamajemen Kualitas. Jakarta: PT. Gramedia Pustaka Utama.

Harsanto, B. (2013). Dasar Ilmu Manajemen Operasi. Bandung: Unpad Press.

Hidayat, R. S. (2019). Analisis Pengendalian Kualitas Dengan Metode Statistical Process Control (SPC) Dalam Upaya Mengurangi Tingkat Kecacatan Produk Pada PT. Gaya Pantes Semestama. Management Review, 3(3), 379-387.

Irwan, Nurman, T. A., & Sukardi, R. (2021, Januari - April). Kapabilitas Proses Packing Semen Dengan Menggunakan Statistikal Quality Control (Studi Kasus : PT.Seemen Bosowa Maros). Jurnal Teknosains, 15(1), 58-66.

Jay, H., & Barry, R. (2013). Operations Management-Manajemen Operasi. Jakarta: Salemba Empat.

Kosasih, W., Adianto, & Erickson. (2015). Analisis Pengendalian Kualitas Produk Bucket Tipe ZX 200 GP Dengan Metode Statistical Process Control (SPC) Dan Failure Mode And Effect Analysis (Studi Kasus : PT.CDE). Jurnal Ilmiah Teknik Industri, 3(2), 85-93.

Kotler, P. (1997). Manajemen Pemasaran Analisis Perencanaan,Implementasi dab Kontrol. Jakarta: PT.Prenhallindo.

Munawaroh, M. (2015). Manajemen Operasi : Strategi Untuk Mencapai Keunggulan Kompetitif. Yogyakarta: Gramasurya.

Ningrum, H. F. (2019, September-Desember). Analisis Pengendalian Kualitas Produk Menggunakan Metode Statistical Process Control (SPC) Pada PT Difa Kreasi. Jurnal Bisnisman : Riset Bisnis dan Manajemen, 1(2), 61-75.

Putri, A. S., & Karima, H. Q. (2022). Analisis Pengendalian Kualitas Benang TCM 40'SK Pada Proses Winding Menggunakan Metode Statistical Process Control Di PT.Delta Dunia Tekstil IV. Jurnal REKAVASI, 10(1), 9-17.

R, E., & W, H. (2020, Maret). Statistical Process Control (SPC) Untuk Pengendalian Kualitas Produk Mebel Di UD.Ihtar Jaya. Bisma : Jurnal Manajemen, 6(1), 50-59.

Suhartini, N. (2020). Penerapan Metode Statistical Process Control (SPC) Dalam Mengidentifikasi Faktor Penyebab Utama Kecacatan Pada Proses Produksi Produk ABC. Jurnal Ilmiah Teknologi dab Rekayasa, 25(1), 10-23.

Supono, J., & Puji, R. (2022, Januari - juni). Pengendalian Kualitas Produk Menggunakan Metode Statistical Quality Control (SQC) Pada Divisi Curing Plant Di PT.Gajah Tunggal,Tbk. Jurnal Teknik : Universitas Muhammadiyah Tangerang, 9(1), 81-91.

Trenggonowati, D. L., & Arafiany, N. M. (2018, Maret). Pengendalian Kualitas Produk Baja Tulang Sirip 25 Dengan Menggunakan Metode SPC Di PT.Krakatau Wajatama Tbk. Journal Industrial Servicess, 3(2), 123-131.

Vera, D., & Wahyuni, F. (2016, Desember ). Pengendalian Kualitas Kertas Dengan Memggunakan Statistical Process Control di Paper Machine 3. Jurnal Ilmiah Teknik Industri, 15(2), 87-93.

Yudianto, Parinduri , L., & Harahap, B. (2018, Januari ). Penerapan Metode Statistical Process Control Dalam Mengendalikan Kualitas Kertas Robbin (Studi Kasus : PT.Pusaka Prima Mandiri). Jurnal Buletin Utama Teknik, 14(2), 106-111.

Yusuf , M. Y., & Riandadari, D. (2016). Analisis Kualitas Produk Menggunakan Metode SPC Dan RPN Untuk Mengurangi Jumlah Cacat Produk Kantong Plastik,Studi Kasus di PT.HSKU. Jurnal JTM, 4(2), 185-194.