Perancangan Desain Pola Parkir Sepeda Motor Menggunakan Metode Ergonomi Partisipatori  (Studi Kasus : Universitas PGRI Wiranegara)

Andika Rangga Aditya Perdana Putra; Artha Aulia Surya Putra Kencana

doi:10.37090/indstrk.v8i2.1334

Authors

Andika Rangga Aditya Perdana Putra Universitas PGRI Wiranegara
Artha Aulia Surya Putra Kencana Universitas PGRI Wiranegara

DOI:

https://doi.org/10.37090/indstrk.v8i2.1334

Abstract

The limited access to public transportation to Universitas PGRI Wiranegara (UNIWARA) has increased the preference for using private vehicles, thereby emphasizing the need for adequate parking facilities. This study aims to create an optimal design for motorcycle parking patterns at UNIWARA that aligns with user needs, utilizing the Participatory Ergonomics method. Through three participatory ergonomic stages, namely the initial interview stage, group discussion stage, and parking pattern design stage, several issues were identified, including the irregular use of parking facilities, suboptimal capacity, poor vehicle circulation, and excessive interventions by parking attendants. The result of the motorcycle parking design using participatory ergonomics revealed a total capacity of 732 motorcycles in three parking sectors. The design specifications include a parking angle of 90°, a parking unit width of 0.75 meters, a parking unit length of 2 meters, and a parking circulation lane width exceeding 1.5 meters. These specifications address the identified issues and provide a well-structured parking environment that meets the needs and comfort of users.

Keywords: Participatory Ergonomics, Parking Facilities, Parking Pattern

References

Direktorat Jenderal Perhubungan Darat. (1996). Pedoman Teknis Penyelenggaraan Fasilitas Parkir. In Direktorat Jenderal Perhubungan Darat (Vol. 1, Issue 1).

Direktorat Jenderal Perhubungan Darat. (1998). Tentang Pedoman Perencanaan Dan Pengoperasian Fasilitas Parkir. Jakarta. Fondasi : Jurnal Teknik Sipil.

Hidayat, A. H., & Purnomo, H. (2014). Desain Pengering Kerupuk Menggunakan Metode Ergonomi Partisipatori. Seminar Nasinal IENACO 2014, 1(1).

Iskandar, M. N., & Janari, D. (2021). Usulan Desain Troli Barang Menggunakan Pendekatan Antropometri Dan Ergonomi Partisipatori (Studi Kasus PT. Mataram Tunggal Garment). Industry Xplore, 6(2). https://doi.org/10.36805/teknikindustri.v6i2.1745

Jasri, H. (2018). Analisis Kapasitas dan Karakteristik Fasilitas Parkir Fakultas Sains dan Teknologi UIN Sultan Syarif Kasim Riau. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 4(1). https://doi.org/10.24014/jti.v4i1.6035

Jovita Febrini Lius, Teguh Oktiarso, & Novenda Kartika Putrianto. (2022). USULAN PERBAIKAN LABORATORIUM KOMPUTER UNIVERSITAS MA CHUNG PADA ASPEK SUHU DAN PENCAHAYAAN DENGAN PENDEKATAN ERGONOMI PARTISIPATORI. Jurnal Teknik Industri UMC, 2(2). https://doi.org/10.33479/jtiumc.v2i2.32

Kurniawan, S., & Surandono, A. (2017). Analisis Kebutuhan Dan Penataan Ruang Parkir Kendaraan. Studi Kasus Pada Lahan Parkir Kampus II Fakultas Teknik Universitas Muhammadiyah Metro, 6(2).

Low Renzo, V., & Sukapto, P. (2023). Usulan perbaikan sistem kerja menggunakan metode ergonomi partisipatori.

Melfianora. (2019). Penulisan Karya Tulis Ilmiah dengan Studi Literatur. Open Science Framework.

Pradana, M. F., Bethary, R. T., & Amir, A. L. (2018). Analisis Pengaturan Pola Parkir Dan Kebutuhan Parkir (Studi Kasus Stasiun Tangerang). JURNAL FONDASI, 7(2). https://doi.org/10.36055/jft.v7i2.4074

Purnomo, H., & Janari, D. (2015). RANCANG BANGUN MESIN PENGUPAS, PENGHANCUR DAN PENGAYAK SABUT KELAPA. SPEKTRUM INDUSTRI, 13(1). https://doi.org/10.12928/si.v13i1.1838

Riski Arifin, & Muhammad Ragil Suryoputro. (2019). Perancangan Stasiun Kerja Pebatik Canting dengan Pendekatan Ergonomi Partsipatori(Studi Kasus: Batik Putra Laweyan). Talenta Conference Series: Energy and Engineering (EE), 2(3). https://doi.org/10.32734/ee.v2i3.764

Suhardi, B., Citrawati, A., & Dwi Astuti, R. (2021). Ergonomi Partisipatori Implementasi Bidang Kesehatan dan Keselamatan Kerja. In Deepublish Publisher (Issue Januari).

Suhardi, B., Laksono, P. W., & Nugraha, A. A. (2017). Desain Pola Parkir Sepeda Motor dengan Pendekatan Ergonomi Partisipatori. PERFORMA : Media Ilmiah Teknik Industri, 16(1). https://doi.org/10.20961/performa.16.1.12748

Winayati, W., Lubis, F., & Haris, V. T. (2019). ANALISIS KEBUTUHAN AREAL PARKIR GEDUNG FAKULTAS TEKNIK UNIVERSITAS LANCANG KUNING. SIKLUS: Jurnal Teknik Sipil, 5(1). https://doi.org/10.31849/siklus.v5i1.2424