Identifikasi dan Analisa Risiko Keselamatan dan Kesehatan Kerja (K3) Menggunakan Metode HIRARC pada PT. X
DOI:
https://doi.org/10.37090/indstrk.v8i3.1284Abstract
- X is a company that produces packaging bottles and does not have an OHS expert or Health, Safety and Environment (HSE) Department, so it cannot detect the risks that have the potential to cause work accidents that occur at PT. X. Therefore, it is necessary to identify the risks and hazards of work accidents in the work environment with Hazard Identification, Risk Analysis, and Risk Control (HIRARC), this method is a method used to identify the risk of work accidents by identifying, providing risk levels and risk control as an implementation of the K3 Management System (SMK3) in the company. There are 3 work activities identified with 27 risks and hazards of work accidents that occur. The assessment results show that there are 10 risks at a moderate level, 14 risks at a high level, and 3 risks at a very high level. Risk control using 5 hierarchies of risk control Elimination, substitution, Engineering Control, Administrative Controls, and the use of Personal Protective Equipment (PPE).
Keywords: Occupational Safety and Health (OSH), Occupational Risk Hazard, Hazard Identification, Risk Analysis, and Risk Control (HIRARC)
References
Adhi, V. R. P. (2018). Analisis Keselamatan Dan Kesehatan Kerja Menggunakan Metode Hazard Identification and Risk Assessment Pada Proyek Konstruksi Hotel (Studi Kasus Hotel Neo Malioboro) [Undergraduate Thesis]. Universitas Islam Indonesia.
AS/NZS 4360:2004. (2004). Risk Management Guidelines. Broadleaf Capital International Pty Ltd. NSW Australia.
Bird Jr. F.E., & Germain L.G. (1996). Loss Control Management, Practical Loss Control Leadership. (Revised Edition). Det Norske Veritas (USA), Inc.
Danial, A., Hasyim, M. H., & Unas, S. El. (2017). Analisis Risiko Keselamatan Dan Kesehatan Kerja (K3) Dengan Metode Hazard Analysis Dan Consequence – Likelihood Analysis (Studi Kasus Pada Proyek Pembangunan Gedung Baru Fakultas Ilmu Administrasi Universitas Brawijaya). Jurnal Mahasiswa Jurusan Teknik Sipil Universitas Brawijaya, 1(1).
Darmawi, Hermawan. (2016). Manajemen Risiko (2nd ed.). Bumi Aksara.
Hidayat, A. A. (2020). Analisis Program Keselamatan Kerja dalam Usaha Meningkatkan Produktivitas Kerja dengan Pendekatan HIRARC dan FTA (Studi Kasus: PT Mitra Karsa Utama). Scientifict Journal of Industrial Engineering, 1(2), 1–6.
International Labour Organization. (2013). Keselamatan dan Kesehatan Kerja di Tempat Kerja Sarana untuk Produktivitas a Pedoman pelatihan untuk manajer dan pekerja Modul 5 (1st ed.). ILO Publications, International Labour Office.
Mauliyani, H., Romdhona, N., Andriyani, A., & Fauziah, M. (2022). Identifikasi Risiko Keselamatan Kerja Metode (Hirarc) Pada Tahap Pembuatan Tangki Di Pt. Gemala Saranaupaya. Environmental Occupational Health and Safety Journal, 2(2), 163. https://doi.org/10.24853/eohjs.2.2.163-174
Mayadilanuari, A. M. (2020). Penggunaan HIRARC dalam Identifikasi Bahaya dan Penilaian Risiko pada Pekerjaan Bongkar Muat. Jurusan Ilmu Kesehatan Masyarakat, Fakultas Ilmu Keolahragaan, Universitas Negeri Semarang, Indonesia, 4(2), 245–225.
OHSAS 18001:2007. (2007). Occupational Health and Safety Management System – Requirements.
Salsabilla, F. R. (2023). Analisis Risiko Kesehatan dan Keselamatan Kerja (K3) Menggunakan Metode Hazard Identification Risk Assessment and Risk Control (HIRARC) Pada Proyek Konstruksi Pembangunan Jalan Temajuk-Aruk [Undergraduate Thesis]. Universitas Islam Indonesia.
Sugiyono. (2021). Metode Penelitian Kuantitatif, Kualitatif, dan R&D (3rd ed.). Alfabeta.
Suma’mur P.K. (1996). Keselamatan Kerja dan Pencegahan Kecelakaan (9th ed.). Gunung Agung.
Triswandana, E. (2020). Penilaian Risiko K3 dengan Metode HIRARC. UKaRsT, 4(1), 96. https://doi.org/10.30737/ukarst.v4i1.788
Undang-Undang RI. (1970). Undang-Undang Republik Indonesia Nomor 1 Tahun 1970 Tentang Keselamatan Kerja.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
