ANALISIS KECACATAN KEMASAN PRODUK OKKY JELLY DRINK PERISA BLACKCURRANT SEBAGAI UPAYA PERBAIKAN KUALITAS DENGAN METODE DMAIC PADA PT. TRITEGUH MANUNGGAL SEJATI

Authors

  • Suharto Suharto Program Studi Teknik Industri Fakultas Teknik Universitas Tulang Bawang Lampung

DOI:

https://doi.org/10.37090/indstrk.v3i1.129

Abstract

This study aims to determine and identify the causes of defects in the production process of PT. Triteguh Manunggal Sejati and know the level of sigma level. This research uses the six sigma method with the DMAIC approach as a quality control tool, which includes the Define, Measure, Analyze, Improve and Control stages. Based on this study the results obtained are the level of sigma level at PT.Triteguh Manunggal Sejati is 4.96, which means that in the stage of sigma level the company has not reached the level of six sigma levels because in the production process at PT.Triteguh Manunggal Sejati still has product defects in the production process not yet achieved zero defect. The causes of product defects are based on cause and effect diagrams namely lid / seal defects are leaky lid, broken lid, and tilted lid. Kata kunci : Defect, Six Sigma, DMAIC, cause and effect diagram

References

Assauri, Sofjan. 2008. “Manajemen Produksi dan Operasiâ€Lembaga Penerbit Fakultas Ekonomi UniversitasIndonesia. Jakarta.

Baroto, Teguh. 2002. “Perencanaan dan Pengendalian Produksiâ€.Jakarta: Ghalia Indonesia.

Dewi, S. K. (2012). Minimasi Defect Produk Dengan Konsep Six Sigma. Jurnal Teknik Industri. Vol 13, 1: 43-50

Gaspersz, VINCENT (2002), “Pedoman Implementasi

Program Six Sigmaâ€, Jakarta, PT. Gramedia Pustaka Utama.

Gaspersz, VINCENT (2001), “Total Quality Managementâ€, Jakarta, PT. Gramedia Pustaka Utama.

Khoirunnisa., & Ganika, G. (2012). “Analisis Kecacatan Produk Sebagai Upaya Perbaikan Kualitas Menuju Zero Defect. Jurnal Manajemen Dan Bisnis. Vol IX, 1â€.

Komarudin., Saputra, R. (2011). “Analisis Cacat Produk Botol Kemasan Plastik Dengan Menggunakan Metode Six Sigma Di PT. X. Jurnal Industri. Vol 04, 07, 2333â€.

Miranda Tunggal Amin Widjaja (2002), “Six Sigma: Gambaran Umum Penerapan Proses dan Metode-Metode Yang Digunakan Untuk Perbaikanâ€,Jakarta, Harvindo.

Pande, Peter S, Robert P. Newman, Roland R. Cavanagh (2002), “The Six Sigma Way: Bagaimana GE, Motorola dan PerusahaanTerkenal Lainnya Mengasah Kinerja Merekaâ€, Yogyakarta, Andi.

Pyzdek, Thomas (2000), “The Six

Sigma Handbookâ€, Jakarta, Salemba Empat.

Downloads

Published

2021-04-01