Penilaian Risiko Kecelakaan Kerja dengan Metode Job Safety Analysis dan Risk Assessment pada PT. Asia Pacific Fibers

Ahmad Zidane; Umi Nuraini

doi:10.37090/indstrk.v8i4.1457

Authors

Ahmad Zidane Universitas Singaperbangsa Karawang
Umi Nuraini Universitas Singaperbangsa Karawang

DOI:

https://doi.org/10.37090/indstrk.v8i4.1457

Abstract

Asia Pacific Fibers, Tbk Karawang is one of the factory facilities producing Polyester Chips and Synthetic Fibers which was previously called PT.Polysindo Eka Perkasa. PT. Asia Pacific Fibers is a public company operating in the textile sector and headquartered in Jakarta, Indonesia. The company also has standard procedures for dealing with emergency situations and providing appropriate personal protective equipment (PPE) to employees. The Occupational Health and Safety (OHS) system in a company should be considered. However, even though the company has implemented an OHS system, there are still many employees who violate it and lack awareness of work accidents that can occur. Therefore, this research aims to identify and assess potential work accidents and determine which potentials must be prioritized. The methods used in this research are job safety analysis (JSA) and risk assessment. The results of this research are that there are 2 potential work accidents in the minor/tolerate category, 3 in the moderate category, and 2 potential work accidents in the serious category and immediate prevention recommendations must be given.

Keywords: Hazard, Job Safety Analysis, OHS, Risk Assessment

References

Indragiri, S., & Yuttya, T. (2020). Manajemen Risiko K3 Menggunakan Hazard Identification Risk Assessment and Risk Control (Hirarc). Jurnal Kesehatan, 9(1), 1080–1094. https://doi.org/10.38165/jk.v9i1.77

NPSA.NHS. (2008). A risk matrix for risk managers. National Patient Safety Agency, January.

Nurkholis, N., & Adriansyah, G. (2017). Pengendalian Bahaya Kerja Dengan Metode Job Safety Analysis Pada Penerimaan Afval Lokal Bagian Warehouse Di Pt. St. Teknika: Engineering and Sains Journal, 1(1), 11. https://doi.org/10.51804/tesj.v1i1.63.11-16

Pertiwi, A. D., Sugiono, & Efranto, R. Y. (2015). Implementasi Job Safety Analysis ( Jsa ) Dalam Upaya Pencegahan Terjadinya Kecelakaan Akibat Kerja ( Studi Kasus : Pt . Adi Putro Wirasejati ) Implementation Of Job Safety Analysis ( Jsa ) In Prevention Of Work Accide. Rekayasa Dan Menejamen Sistem Industri, 3(2), 386–396.

Pratama, A., Rohmah, A. N., & Haryat, R. (n.d.). Laporan Kerja Praktik Analisis Risiko K3 Menggunakan Pendekatan HIRADC dan JSA oleh Akhmad Setyawan Pratama Related papers Pert amina RU VI Balongan I Kadek Dwi Permana Put ra IMPLEMENTASI WORK PERMIT SYST EM PT PERTAMINA RU IV CILACAP.

Radite, P., & Fahma, F. (2015). Implementasi Metode Job Safety Analysis dan Risk Assessment di Gudang Bahan Baku PT. XYZ, tbk. Prosiding Seminar Nasional Industrial Engineering Conference, 2010, 137–142.

Ririh, K. R., Sundari, A. S., & Wulandari, D. P. (2018). Analisis Risiko Pada Area Finishing Menggunakan Metode Failure Mode Effect And Analysis (Fmea) Di Pt. Indokarlo Perkasa. Seminar Rekayasa Teknologi SEMRESTEK, 631–640. https://teknik.univpancasila.ac.id/semrestek/2018/assets/proceedings/sm/SEMRESTEK2018_paper_99.pdf

Risdianto Putra, R. I. M., & Dahda, S. S. (2023). Penilaian Risiko Pada Proses Pengambilan Sampel Di Pt. Xyz Menggunakan Metode Fmea Dengan Pendekatan Rca. Journal of Industrial Engineering and Operation Management, 6(1), 102–109. https://doi.org/10.31602/jieom.v6i1.11266

Rizal, M., Jufriyanto, M., & Rizqi, A. W. (2022). Analisis Risiko Kecelakaan Kerja Dengan Metode Failure Mode And Effect Analysis (FMEA) (Studi Kasus: Pekerja Project Economizer, Tangki Scrubber dan Draiyer di Bengkel Fabrikasi PT. Petrokimia Gresik). Jurnal Sains, Teknologi Dan Industri, 20(1), 156–165.

Saputro, M. B., & Basuki, M. (2022). Risk Assessment K3 Pada Divisi Kapal Niaga Pt. Pal Indonesia Menggunakan Metode Fmea (Failure Mode and Effect Analysis ). Jurnal Sumberdaya Bumi Berkelanjutan (SEMITAN), 1(1), 203–213. https://doi.org/10.31284/j.semitan.2022.3240

Soehatman Ramli. (2013). Smart safety : panduan penerapan SMK3 yang efektif / Soehatman Ramli. Jakarta : Dian Rakyat, 2013.

Swaputri, E. (2013). Analisis Penyebab Kecelakaan Kerja. Kesehatan Masyarakat, 9(1), 37–43.

Tengor, C. H., Doda, V., Maddusa, S. S., Kesehatan, F., Universitas, M., & Ratulangi, S. (2017). Analisis Potensi Bahaya Kerja Dengan Metode Job Safety Analysis (Jsa) Pada Pekerja Open Area Di Perusahaan Tepung Kelapa Desa Lelema. Kesmas, 6(3), 1–7.

Umaindra, M. A., & Saptadi, S. (2018). Identifikasi Dan Analisis Risiko Kecelakaan Kerja Dengan Metode Jsa (Job Safety Analysis) Di Departemen Smoothmill Pt Ebako Nusantara. Industrial Engineering Online Journal, 7(1), 343–354. https://ejournal3.undip.ac.id/index.php/ieoj/article/view/20725

Wahyuni, N., Suyadi, B., & Hartanto, W. (2018). PENGARUH KESELAMATAN DAN KESEHATAN KERJA (K3) TERHADAP PRODUKTIVITAS KERJA KARYAWAN PADA PT. KUTAI TIMBER INDONESIA. JURNAL PENDIDIKAN EKONOMI: Jurnal Ilmiah Ilmu Pendidikan, Ilmu Ekonomi Dan Ilmu Sosial, 12(1), 99. https://doi.org/10.19184/jpe.v12i1.7593

Yantono, D., & Basuki, M. (2021). Penilaian Risiko K3 Pada Terminal Nilam-Mirah Surabaya Menggunakan Matrik Risiko Dan Fmea. In Prosiding Seminar Teknologi Kebumian dan Kelautan (SEMITAN) (Vol. 3, Issue 1, pp. 361–365).