Penilaian Postur Kerja dengan Metode REBA pada UD. Bintang Terang Roti Ketawa
DOI:
https://doi.org/10.37090/indstrk.v9i1.1497Abstract
This research aims to determine the level of complaints felt by workers at UD. Bintang Terang Roti Ketawa, because there is the use of manual tools and a mismatch between body dimensions and the facilities used by the workers, seen from the results of the body map questionnaire that was distributed, there are many complaints felt by the workers, therefore the researchers identified body posture problems using the REBA method, from the assessment of the results using the REBA method obtained very high results or it was said that repairs were carried out immediately. Repairs or design of work facilities were carried out using anthropometric data of workers with normality test calculations, data adequacy, and uniformity so that the results obtained were in accordance with the dimensions of the workers' bodies, the results of facility design. The work succeeded in reducing the level of complaints felt by workers so that the design was suitable for use.
Keywords: Anthropometrics, REBA, UMKM, Work Facilities
Downloads
References
Agustiyani, Noppy, and Firda Ainun Nisah. 2024. “Analisis Postur Kerja Karyawan Menggunakan Metode Rapid Upper Limb Assessment Di PT. BSM.” Industrika : Jurnal Ilmiah Teknik Industri 8(1):1–10. doi: 10.37090/indstrk.v8i1.1175.
Ali, Dimas Nur, and Farras Septianto. 2024. “Volume 8 No . 3 Juli 2024 Identifikasi Postur Kerja Pada Karyawan Sriwijaya Motor Dalam Penerapan Metode RULA P-ISSN : 2776-4745.” 8(3).
Erfan Budi Wijaksono, Heru Sutapa, and Nuraidya Fajariah. 2022. “Pengaruh Fasilitas Kerja Dan Motivasi Kerja Terhadap Kinerja Karyawan Perum Jasa Tirta I Wilayah Sub Dja Ii/I Kediri.” Jurnal Publikasi Sistem Informasi Dan Manajemen Bisnis 1(3):89–105. doi: 10.55606/jupsim.v1i3.659.
Hignett, Sue, and Lynn McAtamney. 2000. “Rapid Entire Body Assessment (REBA).” Applied Ergonomics 31(2):201–5. doi: 10.1016/S0003-6870(99)00039-3.
Munawirsyah, Isnan. 2017. “Pengaruh Kepuasan Kerja Dan Fasilitas Kerja Terhadap Motivasi Kerja Dan Dampaknya Kepada Kinerja Pegawai Non Medis Pada Rumah Sakit Umum Daerah Kota Subulussalam.” Bisnis Administrasi 06:44–51.
Nurhadian, Adhie Fasha. 2019. “Pengaruh Fasilitas Kerja Terhadap Kinerja Pegawai.” Bisnis Dan Iptek 12(1):1–9.
Restuputri, Dian Palupi. 2017. “Metode REBA Untuk Pencegahan Musculoskeletal Disorder Tenaga Kerja.” Jurnal Teknik Industri 18(1):19–28. doi: 10.22219/jtiumm.vol18.no1.19-28.
Rifai’i, Asep. 2019. “Pengaruh Komunikasi Dan Fasilitas Kerja Terhadap Kinerja Pegawai Pada Kecamatan Sukabumi Kabupaten Sukabumi.” Jurnal Ekonomedia 8(1):1689–99.
Santosa, I. Gede. 2016. “Pengaruh Penerapan Ergonomi Pada Fasilitas Kerja Effect of Application of Facilities Working Ergonomics Worker Productivity of Wrapping Dodol.” Journal Logic 15(2):106–11.
Umboh, Markus K., Nancy S. H. Malonda, and Jefferson Mende. 2018. “Analisis Pengaruh Posisi Ergonomis Dengan Metode Rapid Entire Body Assessment ( Reba ) Terhadap Produktivitas Kerja Pada Pekerja Pengupas Serabut Kelapa Tradisional Di Minahasa Utara.” Tekno Mesin 4(2):133–37.
Wahyuni, Sri. 2008. “151023-ID-Pengaruh-Motivasi-Pelatihan-Dan-Fasilita.” 124–34.
Siswiyanti. 2013. “Perancangan Meja Kursi Ergonomis Pada Pembatik Tulis Di Kelurahan Kalinyamat Wetan Kota Tegal.” Jurnal Ilmiah Teknik Industri 12(2):179–92.
Andrijanto, Andrijanto, and Boy Parulian Hutapea. 2019. “Penentuan Data Anthropometri Untuk Perancangan Ulang Produk Dengan Meninjau Interaksi Pengguna Studi Kasus Perancangan Ulang Kursi Roda ISO 7176 Untuk Anak-Anak Tuna Daksa.” Journal of Integrated System 2(1):98–111. doi: 10.28932/jis.v2i1.1721.
Albert. 2011. “Pengaruh Fasilitas Kerja Terhadap Produktivitas Kerja Karyawan.” Jurnal Manajemen 9(1):14–23
Tarwaka, Solichul Bakri, Lilik Sudiajeng. Ergonomi Untuk Keselamatan, Kesehatan Kerja dan Produktifitas. Surakarta: Uniba Press, 2004
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
