Analisis Risiko Kecelakaan Kerja Menggunakan Metode JSA dan HIARO di Departemen Energy Center PT. Indo Bharat Rayon

Muhamad Nugrah Nopiasadi; Bintang Nidia Kusuma; Muhammad Ali  Akbar

doi:10.37090/indstrk.v9i1.1709

Authors

Muhamad Nugrah Nopiasadi Sekolah Tinggi Teknologi Wastukancana Purwakarta
Bintang Nidia Kusuma Sekolah Tinggi Teknologi Wastukencana
Muhammad Ali Akbar Sekolah Tinggi Teknologi Wastukencana

DOI:

https://doi.org/10.37090/indstrk.v9i1.1709

Abstract

This study aims to analyze the potential risks of workplace accidents in the Energy Center Department of PT. Indo Bharat Rayon using the Job Safety Analysis (JSA) and Hazard Identification Assessment of Risk and Opportunities (HIARO) methods. The research identifies the risks faced by employees, assesses the impact of these risks, and provides appropriate control recommendations. The research methodology involves collecting workplace accident data, conducting risk analysis using JSA and HIARO, and assessing risks before and after the implementation of controls. The results show that high-level risks were reduced from 1 to 0, and medium-level risks from 48 to 0 after the controls were applied. The remaining risks were categorized as low risks, which do not require immediate action. The recommended risk controls include elimination, substitution, engineering controls, administrative controls, and the use of personal protective equipment. The implementation of safety culture programs, such as the Safety Program and Job Safety Training, is also suggested to enhance workplace safety. This study provides benefits to the company by identifying and reducing workplace accident risks, and to researchers and universities by increasing knowledge and offering practical references on workplace safety.

Keywords: HIARO, JSA, Occupational Accident Risk, OHS, Risk Control

Downloads

Download data is not yet available.

References

Balili, S. S., & Yuamita, F. (2022, Juni). Analisis Pengendalian Risiko Kecelakaan Kerja Bagian Mekanik Pada Proyek Pltu Ampana (2x3 Mw) Menggunakan Metode Job Safety Analysis (JSA). Jurnal Teknologi dan Manajemen Industri Terapan, 2(1), 61-69.

Firdaus, A., & Yuamita, F. (2022, September). Upaya Pencegahan Kecelakaan Kerja Pada Proses Grading Tbs Kelapa Sawit Di PT. Sawindo Kencana Menggunakan Metode Job Safety Analysis (JSA). Jurnal Teknologi dan Manajemen Industri Terapan (JTMIT), 3(1), 155-162.

Imran, A., Nursinah, A., B, M., Kadir, E., Vanchapo, A. R., Suabey, S., & Hermawan, A. (2023, Juni). Health and Safety Risk Analysis with JSA Method (Job Safety Analysis). International Journal of Health Sciences (IJHS), 2(1), 143-149. doi:DOI : https://doi.org/10.59585/ijhs

Lazuardi, M. R., Sukwika, T., & Kholil, K. (2022). Analisis Manajemen Risiko Keselamatan dan Kesehatan Kerja Menggunakan Metode HIRADC pada Departemen Assembly Listrik. Journal of Applied Management Research, 1(2), 11-20.

Maarif, M. I., & Sutrisno. (2021). Analisis Keselamatan Dan Kesehatan Kerja Dengan Menggunakan Metode Hazop Pada Proses Pan Oil Di PT. X. 135-142.

Marnis, P. (2008). Manajemen Sumber Daya Manusia (1 ed.). (T. Chandra, Penyunt.) Sidoarjo: Zifatama Publisher.

Mawardani, A., & Herbawani, C. K. (2022, April). ANALISA PENERAPAN HIRADC DI TEMPAT KERJA SEBAGAI UPAYA PENGENDALIAN RISIKO: A LITERATURE REVIEW. PREPOTIF Jurnal Kesehatan Masyarakat, 1(6), 316-322.

Mulyojati, P. A., & Yuamita, F. (2023, Juni). Analisis Potensi Bahaya Kerja Pada Proses Pencetakan Pengecoran Logam Menggunakan Metode Job Safety Analysis (JSA). Jurnal Teknologi dan Manajemen Industri Terapan (JTMIT), 2(2), 90-97.

Nafidah, L. N. (2011). Implementation Of Internal Control System On Avian PT. AviaSidoarjo Viewed From The Quality Of Human Resources. Jurnal Entrepreneurship, 133-140.

Nur, M., Valentino, V., Sari, R. K., & Karim, A. A. (2023, September). Analisa Potensi Bahaya Kecelakaan Kerja Terhadap Pekerja Menggunakan Metode Hazard Identification, Risk Assement And Risk Control (HIRARC) Pada Perusahaan Aspal Beton. Jurnal Teknologi dan Manajemen Industri Terapan (JTMIT, 3(2), 150-158.

Organization, I. L. (2018). Meningkatkan Keselamatan dan Kesehatan Pekerja Muda. Jakarta: International Labour Organization.

Rotinsulu, F. N., Dundu, A. K., Malingkas, G. Y., Mondoringin, M. R., & Thambas, A. H. (2023, oktober). RISK POTENTIAL ANALYSIS USING HAZARD IDENTICATION, RISK ASSESSMENT AND DETERMINE CONTROL (HIRADC) AND JOB SAFETY ANALYSIS (JSA) METHODS. Asian Jurnal Of Engineering, Social and Health, 1(2), 1133-1141.

Saputro, T., & Lombardo, D. (2021, April). RISK CONTROL METHOD USING HAZARD IDENTIFICATION, RISK ASSESSMENT AND DETERMINING CONTROL (HIRADC) IN PT. ZAE ELANG PERKASA. Jurnal Baut Dan Manufaktur, 1(3), 23-29.

Septiani, R., & Prayogo. (2021). ANALISIS PENERAPAN KESELAMATAN KERJA DALAM UPAYA PENGENDALIAN KECELAKAAN KERJA DI PT. BUDI DWIYASA PERKASA. 1-8.

Syafarrudin, A. (2012). Manajemen Sumber Daya Manusia Strategi Keunggulan Kompetitif (kedua ed.). Yogyakarta: BPFE-Yogyakarta.

Tambunan , A. P. (2018). LINGKUNGAN KERJA DAN KEPUASAN KERJA KARYAWAN: SUATU TINJAUAN TEORETIS. Jurnal Ilmiah Methonomi, 2(4), 175-183.

Ulimaz, A., & Ansar, M. (2022, Juni). Analisis Keselamatan dan Kesehatan Kerja pada Stasiun Loading Ramp dengan Metode HIRARC di PT. XYZ. INSOLOGI: Jurnal Sains dan Teknologi, 3(1), 268-279.