Implementasi Metode Six Sigma dalam Pengendalian Kualitas Refined Bleached Deodorized Palm Oil di PT. ZZ: .

Riski Aditya; Susanti Sundari; Burhan Nudin

doi:10.37090/indstrk.v9i2.1885

Authors

Riski Aditya Universitas Tulang Bawang
Susanti Sundari Universitas Tulang Bawang
Burhan Nudin Universitas Tulang Bawang

DOI:

https://doi.org/10.37090/indstrk.v9i2.1885

Abstract

PT. ZZ is a company engaged in the processing of crude palm oil, often called Crude Palm Oil (CPO) and its derivatives. The production process in this company has two steps, namely the Refinery Plant and the Fractionation Plant. In the production process at the Refinery Plant, there is often a quality of Refined Bleached Deodorized Palm Oil (RBDPO) that does not comply with the qualifications determined by the company. The number of defective products will have an impact on the time and cost of production, which will increase. This study aims to determine and identify the causes of defective products in the production process using the six sigma method with the DMAIC approach so that it can be a proposal for improvement in the future. The results of this research are that the average sigma value obtained from January 2024 to April 2024 is 5.25, and the average DPMO value from January 2024 to April 2024 is 92.5. The sigma value shows a number that is close to the desired sigma target, namely 6, and based on Pareto diagram analysis, shows that the dominant defect is Free Fatty Acid (FFA).

Keywords: CPO, DMAIC, Fractination Plant, RBDPO, Refinery Plant, Six Sigma

Downloads

Download data is not yet available.

References

Didiharyono, D., Marsal, M., & Bakhtiar, B. (2018). Analisis Pengendalian Kualitas Produksi Dengan Metode Six-Sigma Pada Industri Air Minum PT Asera Tirta Posidonia, Sainsmat : Jurnal Kota Ilmiah Palopo. Ilmu Pengetahuan Alam, 7(2), 163. https://doi.org/10.35580/sainsmat7273702018

Faturochman, A., Prakoso, I., Sibarani, A. A., & Muhammad, K. (2020). Penerapan Metode Six Sigma dalam Analisis Kualitas Produk (Studi Kasus Perusahaan Pemroduksi Baja Tulang Beton). SPECTA Journal of Technology, 4(2), 45–54. https://doi.org/10.35718/specta.v4i2.189

Harahap, B., Parinduri, L., & Fitria, A. (2018). Analisis Pengendalian Kualitas Dengan Menggunakan Metode Six Sigma (Studi Kasus : PT Growth Sumatra Industry). Buletin Utama Teknik, 13(3), 211–213

Indriyawati, S., & Adistana, G. A. Y. P. (2018). Analisis Pengendalian Kualitas Produk Tiang Pancang Menggunakan Metode Six Sigma. Jurnal Teknik Sipil, 1–10

Irwan, I., & Haryono, D. (2015). Pengendalian Kualitas Statistik (Pendekatan Teoritis Dan Aplikatif). Bandung:Alfabeta

Lestari, F. A., & Purwatmini, N. (2021). Pengendalian Kualitas Produk Tekstil Menggunakan Metoda DMAIC. Jurnal Ecodemica: Jurnal Ekonomi, Manajemen, Dan Bisnis, 5(1), 79–85. https://doi.org/10.31294/jeco.v5i1.923

Pratiwi, R., Mustakim, M., & Sucilianti, L. (2021). Pengendalian Kualitas Pada Corrugated Concrete Sheet Pile Dengan Metode Six Sigma. Jurnal Ilmiah Teknik Sipil TRANSUKMA, 3(2), 99–113. https://doi.org/10.36277/transukma.v3i2.76

Rahayu, P., & Bernik, M. (2020). Peningkatan Pengendalian Kualitas Produk Roti dengan Metode Six Sigma Menggunakan New & Old 7 Tools. Jurnal Bisnis & Kewirausahaan, 16(2),128–136. http://ojs.pnb.ac.id/index.php/JBK

Rimantho, D., & Mariani, D. M. (2017). Penerapan Metode Six Sigma Pada Pengendalian Kualitas Air Baku Pada Produksi Makanan. Jurnal Ilmiah Teknik Industri, 16(1), 1. https://doi.org/10.23917/jiti.v16i1.2283

Rosyidasari, & Iftadi, I. (2020) Implementasi Six Sigma Dalam Pengendalian Kualitas Produk Refined Bleached Deodorized Palm Oil. Jurnal INTECH Teknik Industri Universitas Serang Raya Vol 6 No 2

Siregar, A. P., & Sitepu, A. Z. (2023). Analisis Perlindungan Hukum Konsumen terhadap Tanggung Jawab Produk Cacat di Lazada. Innovative: Journal Of Social Science Research, 3(3), 9114-9127.

Sitanggang, M. A., & Sukanta, S. (2023). Analisis Pengendalian Kualitas Presentase Olein RBDPL Utama Pada Proses Fraksinasi Di PT. Y Dengan Metode Statistical Quality Control. Industrika : Jurnal Ilmiah Teknik Industri, 7(2),172–181. https://doi.org/10.37090/indstrk.v7i2.935

Sugiyono. (2018). Metode Penelitian Kuantitatif Kualitatif dan R&D. Bandung: Alfabeta

Sugiyono. (2015). Metode Penelitian Kuantitatif Kualitatif dan R&D. Bandung: Alfabeta

Suharto, S. (2021). Analisis Kecacatan Kemasan Produk Okky Jelly Drink Perisa BlackCurrant Sebagai Upaya Perbaikan Kualitas Dengan Metode DMAIC Pada PT. Triteguh Manunggal Sejati. Industrika : Jurnal Ilmiah Teknik Industri, 52–53.

Wilujeng, F. R., & Wijaya, T. (2019). Penerapan Metode DMAIC untuk Pengendalian Kualitas pada UKM Tempe Semanan Application of the DMAIC Method for Quality Control in Tempe Semanan SMEs. Inovasi Ilmu