Pengendalian Kualitas Produk Raw Glass Mirror Dengan Metode Statistical Process Control (SPC) Di PT. DEF

Merlin Erinda Kusdiani; Sukanta Sukanta

doi:10.37090/indstrk.v9i2.1939

Authors

Merlin Erinda Kusdiani Universitas Singaperbangsa Karawang
Sukanta Sukanta Universitas Singaperbangsa Karawang

DOI:

https://doi.org/10.37090/indstrk.v9i2.1939

Abstract

A company cannot be separated from its customers or the products it makes. To improve production quality, the company controls product quality so that production activities can run well and smoothly. The company sets certain standards for its products, where each sample taken is tested first to find out whether the product produced meets the standards. So this research was conducted to analyze the quality control of Raw Glass Mirror products using the Statistical Process Control (SPC) Method. There are 5 types of defects analyzed, namely Bubble, Stone, Tin, Knot, and Drip. The factors that cause this type of defect are human, machine, method, material and environmental factors. Thus, the proposed improvement given by researchers is to provide routine training to all machine operators, carry out regular maintenance, select raw materials before use and check environmental conditions during the production process.

Keywords: Quality Control, Product Defect, Statistical Process Control (SPC)

Downloads

Download data is not yet available.

References

Absa, A. S. M., & Suseno, S. (2022). Analisis Pengendalian Kualitas Produk Eq Spacing Dengan Metode Statistic Quality Control (SQC) Dan Failure Mode And Effects Analysis (FMEA) Pada PT. Sinar Semesta. Jurnal Teknologi Dan Manajemen Industri Terapan, 1(3), 183–201. https://doi.org/10.55826/tmit.v1iiii.51

Baidawih, M. H., & Nugraha, A. E. (2024). Volume 8 No . 3 Juli 2024 Penggunaan Metode SPC ( Statistical Process Control ) pada Proses Pengendalian Kualitas Produk DC di PT . X P-ISSN : 2776-4745. 8(3), 677–686.

Devani, V., & Wahyuni, F. (2017). Pengendalian Kualitas Kertas Dengan Menggunakan Statistical Process Control di Paper Machine 3. Jurnal Ilmiah Teknik Industri, 15(2), 87. https://doi.org/10.23917/jiti.v15i2.1504

Dwi, N., & Aridinanti, L. (2016). Pengendalian Kualitas Proses Produksi Kaca Lembaran Jenis Laminated di PT . X dengan Metode Six Sigma. Jurnal Sains Dan Seni ITS, 5(1).

ELYAS, R., & HANDAYANI, W. (2020). Statistical Process Control (Spc) Untuk Pengendalian Kualitas Produk Mebel Di Ud. Ihtiar Jaya. Bisma: Jurnal Manajemen, 6(1), 50. https://doi.org/10.23887/bjm.v6i1.24415

Fadhilah, N. A., & Arifin, J. (2024). Analisis Pengendalian Kualitas Produk Part Housing SUV Menggunakan Metode Statistical Process Control di PT. Y. Industrika : Jurnal Ilmiah Teknik Industri, 8(2), 459–470. https://doi.org/10.37090/indstrk.v8i2.1206

Haryono MSIE, S. (2015). Final Project-Ss 145561 Capability Analysis Automotive Glass Production Process in Pt.Asahimas Flat Glass Tbk. Sidoarjo East Java.

Helena, A., & HS, M. (2020). Penerapan Metode Statistical Process Control Sebagai Pengendalian Kualitas Mortar. Rekayasa Teknik Sipil, 1–10. https://ejournal.unesa.ac.id/index.php/rekayasa-teknik-sipil/article/view/32167

Hidayat, R. S. (2019). Analisis Pengendalian Kualitas Dengan Metode Statistical Process Control (SPC) Dalam Upaya Mengurangi Tingkat Kecacatan Produk Pada PT. Gaya Pantes Semestama. Journal of Management Review, 3(3), 379–387. http://jurnal.unigal.ac.id/index.php/managementreviewdoi:http://dx.doi.org/10.25157/mr.v3i3.2906

Nofirza, Susanti, R., Ramadhan, D. S., Arwi, P. P., & Siregar, M. (2023). Analisis Oil Losses Pada Stasiun Perebusan Produksi Crude Palm Oil (CPO) Menggunakan Metode Statistical Process Control (SPC). Jurnal Teknologi Dan Manajemen Industri Terapan, 2(2), 98–110. https://doi.org/10.55826/tmit.v2i2.67

Penulis. (2023). PENGENDALIAN KUALITAS PRODUK RAW GLASS MIRROR DENGAN METODE STATISTICAL PROCESS CONTROL ( SPC ) DI PT . ASAHIMAS FLAT GLASS TBK ( CIKAMPEK FACTORY ) PENGENDALIAN KUALITAS PRODUK RAW GLASS MIRROR DENGAN METODE STATISTICAL PROCESS CONTROL ( SPC ) DI PT . AS.

Purwani, A. P., Safariyani, E., & Anbiya, M. P. (2024). Analisis Penyebab Produk Defect Jenis Dust di Proses Visual Inspection Menggunakan Metode Failure Mode and Effect Analysis (FMEA). Jurnal Teknik Industri Terintegrasi, 7(3), 1371–1378. https://doi.org/10.31004/jutin.v7i3.27694

Shiyamy, A. F., Rohmat, S., & Sopian, A. (2021). Analisis Pengendalian Kualitas Produk Dengan Statistical Process Control. Komitmen: Jurnal Ilmiah Manajemen, 2(2), 32–44. https://doi.org/10.15575/jim.v2i2.14377

Sinaga, S. T. D., Putri, S. H., & Pujianto, T. (2023). Analisis Pengendalian Kualitas Pada Proses Produksi Teh Hitam Menggunakan Metode Statistical Quality Control. Teknotan, 17(2), 153. https://doi.org/10.24198/jt.vol17n2.10

Solihudin, M., & Kusumah, L. H. (2017). Analisis pengendalian kualitas proses produksi dengan metode Statistical Process Control (SPC) di PT Surya Toto Indonesia Tbk. Jurnal Teknik Industri, Universitas Mercu Buana, 3(2), 1–8.

Wahyudi, D., Sahbana, M. A., & Putra, T. D. (2012). JURNAL KAJIAN TEKNIK MESIN Vol. 7 No. 2. 7(2), 10–15.