Relayout Tempat Penyimpanan Suku Cadang Motor  Menggunakan Metode Class Based Storage  untuk Efisiensi Waktu Pencarian

Moch Arif Bahrudin; Herlina Herlina

doi:10.37090/indstrk.v9i2.1949

Authors

Moch Arif Bahrudin Universitas 17 Agustus 1945 Surabaya
Herlina Herlina Universitas 17 Agustus 1945 Surabaya

DOI:

https://doi.org/10.37090/indstrk.v9i2.1949

Abstract

This study aims to enhance the operational efficiency of Toby Motor Workshop through the implementation of the Class-Based Storage (CBS) method in the relayout of spare parts storage. The workshop faces challenges such as disorganized warehouse layouts, difficulties in locating items, and lengthy spare parts retrieval times. To address these issues, data on 223 types of spare parts were collected, including usage frequency and retrieval times over a 12-week period. The ABC classification method was employed to group spare parts into three categories—A, B, and C—based on usage frequency and item value. Class A items, with high usage frequency, were placed in more accessible locations. The findings indicate that applying the CBS method significantly reduced retrieval times, optimized space utilization, and streamlined warehouse workflows. The proposed warehouse layout also improved inventory management efficiency and reduced staff travel distances when retrieving items. The implementation of CBS not only boosts operational efficiency but also supports a more structured warehouse management system. Consequently, this study provides practical contributions to improving productivity and competitiveness at Toby Motor Workshop.

Keywords: Class Based Storage, Klasifikasi ABC, Relayout

Downloads

Download data is not yet available.

References

Ahdiyat, O. T., & Nugroho, Y. A. (2022). ANALISIS KINERJA MESIN BANDSAW MENGGUNAKAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) dan SIX BIG LOSSES PADA PT QUARTINDO SEJATI FURNITAMA. JCI Jurnal Cakrawala Ilmiah, 2(1). http://bajangjournal.com/index.php/JCI

Ariyanto, D., Teknologi, U., Candra, Y., Universitas, W., Yogyakarta, T., & Albern, S. (2023). Perbaikan Tata Letak Penyimpanan dengan Metode Class Based Stotage, Blocplan, dan Dedicated Storage pada RSPAU Hardjolukito. JURNAL ILMIAH TEKNIK INDUSTRI DAN INOVASI, 1(2), 16–25. https://doi.org/10.59024/jisi.v1i2.411

Eka, P., Karunia Wati, D., & Singgih, M. (2019). Perancangan Ulang Tata Letak Fasilitas Dengan Memperhatikan Aspek Ergonomi Lingkungan. Jurnal Teknologi Dan Terapan Bisnis, 2(2), 33–41.

Fadillah, F., & Muklis, M. (2022). Perancangan Ulang Alokasi Slot Penyimpanan Item Gudang Dengan Metode Class Based Storage Untuk Mengurangi Overtime Pada Warehouse (Studi Kasus PT Sumber Alfaria Trijaya, Tbk/Alfamart Kota Serang). PROSIDING SEMINAR NASIONAL BATCH 1. https://prosiding.amalinsani.org/index.php/semnas

Johan, & Suhada, K. (2018). Usulan Perancangan Tata Letak Gudang dengan Menggunakan Metode Class-Based Storage (Studi Kasus di PT Heksatex Indah, Cimahi Selatan). JOURNAL OF INTEGRATED SYSTEM, 1(1), 52–71.

Juniarty, S., & Zai, I. (2023). Strategi Perancangan Tata Letak Material di Gudang dan Pencatatan Stock Batam Indo Keramik. Journal of Human And Education, 3(4), 258–263.

Octaviani, Y., & ShilulImaroh, T. (2020). Analysis of ABC and EOQ Methods on Aromatic Machine Spare Parts to Improve Cost Efficiency at PT. XYZ. Jurnal Manajemen Dan Bisnis, 4(3).

Pratama, I., & Utami, S. F. (2023). Analisis Diagram Fishbone Pada Kualitas Bata Ringan PT. Lombok Mulia Jaya. UTS Student Conference, 1(2).

Rosihin, R., Ma’arij, Cahyadi, D., & Supriyadi. (2021). Analisa Perbaikan Tata Letak Gudang Coil dengan Metode Class Based Storage. Jurnal INTECH Teknik Industri Universitas Serang Raya, 7(2), 166–172. https://doi.org/10.30656/intech.v7i2.4036

Sari, N. D., Iftadi, I., & Suletra, I. W. (2021). Evaluasi Kondisi Kerja pada UMKM Percetakan Menggunakan Work Improvement in Small Enterprises (WISE). Jurnal INTECH Teknik Industri Universitas Serang Raya, 7(1), 45–55. https://doi.org/10.30656/intech.v7i1.2895

Setiana, A. F., & Murnawan, H. (2024). Perencanaan Tata Letak Gudang dengan Prinsip 5S (Seiri, Seiso, Seiton, Seiketsu, dan Shitsuke) Pada PT. Aneka Coffee Industry Guna Meminimalkan Waktu Pencarian di Gudang. Jurnal Teknik Industri Terintegrasi, 7(3), 1489–1500. https://doi.org/10.31004/jutin.v7i3.28878

Sigit Nurdianto, N., & Purnama, J. (2025). Investasi Perancangan Alat Pemberi Pakan pada Ayam Secara Otomatis guna Meningkatkan Produktivitas Kerja. INDUSTRIKA, 9, 295–302. https://jurnal.utb.ac.id/index.php/indstrk

Syafri, M. H., & Murnawan, H. (2025). Pemanfaatan Optimal Limbah: Inovasi dan Teknologi Pembuatan Briket dari Ampas Kopi dan Kulit Ari Kelapa. IDUSTRIKA, 9, 303–313. https://jurnal.utb.ac.id/index.php/indstrk

Yoga Pamungkas, C. (2023). PENERAPAN QFD BERBASIS ANALISA HOQ DALAM UPAYA PENINGKATAN DAN PERBAIKAN KUALITAS LAYANAN PUSKESMAS. 3(3), 286–295. http://sosains.greenvest.co.id

Zuhrotusy-Syarifah Qurrotu’aini, & M. Ardan. (2023). Analisis Fishbone sebagai Implementasi Solusi Penggunaan Tempat Tidur Belum Ideal Rumah Sakit. Jurnal Pengabdian Kepada Masyarakat Nusantara (JPkMN), 04(2), 775–782.