Perbaikan Tata Letak Fasilitas Gudang Guna Menekan Ongkos Material Handling Pada CV. SG

Jupiter Yulio Prima; Siti Mundari

doi:10.37090/indstrk.v9i2.1996

Authors

Jupiter Yulio Prima Universitas 17 Agustus 1945 Surabaya
Siti Mundari Universitas 17 Agustus 1945 Surabaya

DOI:

https://doi.org/10.37090/indstrk.v9i2.1996

Abstract

CV. SG is a company engaged in the distribution of bottled cooking oil, including the Minyakita product. However, an unstructured facility layout has led to various challenges, particularly in operational efficiency and material handling costs. Inefficient placement of goods and lack of attention to material movement distances have resulted in increased operational expenses and prolonged processing times. These inefficiencies can hinder productivity and add to the workload, especially in routine material handling activities involving frequent movement of goods.To address these issues, this study focuses on redesigning the warehouse layout with the primary objective of optimizing material movement distances and reducing material handling costs. The method employed in this research is quantitative analysis, which includes calculating transfer distances, movement frequency, material handling moments, and cost estimation.The findings indicate that the initial layout incurred a total material handling cost of IDR 2,860,000 per month, with a total movement distance of 300.80 meters. After the redesign, the proposed layout successfully reduced the movement distance to 241.17 meters, leading to a decrease in material handling costs to IDR 2,761,200 per month. Thus, the implementation of the new layout has proven to be more efficient in reducing costs and enhancing the effectiveness of material movement within the warehouse.

Keywords: Layout, Material Handling, Warehouse

Downloads

Download data is not yet available.

References

Albertus Laurensius Setyabudhi, S. T. M. M. T. I. P. M., Dr. Syamsuddin, S. E. M. S., Nika Sintesa, S. P. M. P. M. M. C. P., Dr. Nana Nawasiah, S. E. M. M., Giri Nurpribadi, S. T. P. M. M., Dr. Suesilowati, M. P. M. M. P., Markus Asta Patma Nugraha, S. S. T. M. T., Deyidi Mokoginta, S. T. M. S., Angling Sugiatna, S. T. M. T., Dynes Rizky Navianti, S. S. M. S. I., & others. (2024). MANAJEMEN LOGISTIK. Cendikia Mulia Mandiri.

Ambrose, G., & Harris, P. (2005). Basics Design 02: Layout. Bloomsbury Academic.

Arnold, J. R. T. (2013). Introduction to Materials Management.

Astuti, R. D., & Iftadi, I. (2016). Analisis dan Perancangan Sistem Kerja. Deepublish.

Divibriani, M. (2025). Volume 9 No . 1 Januari 2025 Implementasi Pendekatan Activity Relationship Chart dalam Perancangan Tata Letak Gudang Baru untuk Memperpendek Perpindahan Material di UD . M P-ISSN : 2776-4745. 9(1).

Donald J. Bawersox. (1981). The McGraw-HilVIrwin Series Operations and Decision Sciences Operations Management Bowersox. 5–6.

Fadilah, A., Hikam, A., Muhtar, D., Sari, M. A., & Rifai, P. (2025). Volume 9 No . 1 Januari 2025 Perancangan Ulang Tata Letak IKM Tahu Sehat Sari untuk Mengurangi Jarak Material Handling P-ISSN : 2776-4745. 9(1), 1–12.

Francis, R. L., White, J. A., & McGinnis, L. F. (1992). Facility layout and location : an analytical approach. In Prentice-Hall international series in industrial and systems engineering TA - TT - (2nd Editio). Prentice-Hall.

Frazelle, E. H. (2001). World-Class Warehousing and Material Handling. McGraw Hill LLC.

Groover. (2018). Mikell P. Groover - Automation Production Systems and ComputerIntegrated Manufacturing (2018, Pearson) - libgen.li. 1–805.

Gu, J., Goetschalckx, M., & McGinnis, L. F. (2007). Research on warehouse operation: A comprehensive review. European Journal of Operational Research, 177(1), 1–21.

Guntara, P., Vikaliana, R., & Kurnia, G. (2024). Perancangan Tata Letak Gudang Penyimpanan Material pada Perusahaan Air Minum dengan Menggunakan Metode Class Based Storage. Industrika : Jurnal Ilmiah Teknik Industri, 8(2), 372–386. https://doi.org/10.37090/indstrk.v8i2.1437

Heizer, J., Render, B., & Munson, C. (2020). Operations Management: Sustainability and Supply Chain Management. Pearson.

Maulana, S., Sundari, C., Ekasari, S., Nurjanah, D. S., Sudirman, A., Anisah, H. U., Syah, S., Saputra, D. H., & Satria, E. (2021). OPERATIONS MANAGEMENT. Zahir Publishing.

Muther, R., & Hales, L. (2015). Systematic Layout Planning. In Management & Industrial Research Publications.

Nurul Hidayat, S. E. M. S., Dr. Syamsuddin, S. E. M. S., Nurul Aziz Pratiwi, S. E. Μ. Μ., Nyimas Desy Rizkiyah, S. S. T. M. T., Dr. Nana Nawasiah, S. E. M. M., Roudlotul Badi’ah, S. M. Μ. Μ., Muhammad Prasha Risfi Silitonga, S. S. M. T., Euis Ajizah, M. M., Dirarini Sudarwadi, S. E. M. S., & Dr. H. M. Anwar, L. M. M. M. S. C. (2024). MANAJEMEN OPERASI DAN PRODUKSI. Cendikia Mulia Mandiri.

Rushton, A., Croucher, P., & Baker, P. (2014). Outsourcing:Services anddecision criteria. In The Handbook of Logistics and Distribution Management: Understanding the Supply Chain.

Sule, D. R. (2008). Manufacturing Facilities: Location, Planning, and Design, Third Edition.

Tompkins, J. A., White, J. A., Bozer, Y. A., & Tanchoco, J. M. A. (2011). Facilities planning – 4th edition. In International Journal of Production Research (Vol. 49, Issue 24