Analisis Penerapan Prinsip 5S pada Gudang Non-Medis di Rumah Sakit Daerah UOBK

Henry Hafidz Anbiya; A. Anas Haikal

doi:10.37090/indstrk.v9i2.2031

Authors

Henry Hafidz Anbiya Universitas Islam Kadiri
A. Anas Haikal Universitas Islam Kadiri

DOI:

https://doi.org/10.37090/indstrk.v9i2.2031

Abstract

UOBK Regional General Hospital (RSUD) is a service industry that considers optimal service quality for patients. One way to optimize services is by optimizing non-medical service equipment and storage warehouses. Analysis of the implementation of the 5S Principles and recommendations for improvements were carried out at the Non-Medical Warehouse at UOBK Regional Hospital to support increasing worker productivity which is expected to have an impact on the quality of hospital services. As a result of the research we conducted, the application of the 5S Principles at UOBK Hospital needs to be improved. This is proven in the analysis of the implementation of the 5S Principles that has been carried out, many facts were found that did not apply the 5S Principles. So it is necessary to increase knowledge about the 5S Principles and joint commitment between elements in the Non-Medical Warehouse at UOBK Regional Hospital

Keywords: 5S Principles, Hospital, Non-Medical, Warehouse

Downloads

Download data is not yet available.

References

Althaf, D. F., & Sutrisno. (2024). Analisis Pemborosan Pada Area Penyimpanan Di Gudang Sparepart Dengan Metode Waste Assesment Model. Industrika (Jurnal Ilmiah Teknik Industri), 8, 603–614.

Arief Rahman, S. Ms., Dr. Sri Gunani Partiwi, Wahyu Adithya, Ss., Farida Rachmawati, A., & Nur Layla S.T. (2018). Implementasi 5S + S (Direktorat Sumber Daya Manusia dan Organisasi Institut Teknologi Sepuluh Nopember, Ed.; 1st ed., Vol. 1). Institut Teknologi Sepuluh Nopember.

Doni All, S. H., & Wahyudin. (2024). 4S. View of Penerapan Lean Manufacturing dan Analisis 5W+1H Dalam Upaya Mengurangi Waste Proses Produksi Frame Chassis di PT. OC. Industrika (Jurnal Ilmiah Teknik Industri), 8, 587–602.

Firmansyah, A., & Momon, A. (2024). Identifikasi dan Usulan Menangani Waste pada Proyek Mesin Selectifier dengan Pendekatan Lean Project Management Di PT. Z. Industrika (Jurnal Ilmiah Teknik Industri), 3, 471–478.

Geyska, S., Arini, A. P., Andi, I. I., & Muqimuddin. (2024). Minimasi Waktu Tunggu pada Proses Disassembly Engine dengan Pendekatan Lean Manufacturing di PT OPQ. Industrika (Jurnal Ilmiah Teknik Industri), 8, 800–812.

Giari Ayunintya, P., & Asep Erik, N. (2023). Analisis Waste Pada Proses Produksi Sosis Ayam Dengan Pendekatan Lean Manufacturing Di PT. BI. Industrika (Jurnal Ilmiah Teknik Industri), 7, 208–215.

Iyer, S. V., Sangwan, K. S., & Dhiraj. (2023). Digitalization: a tool for the successful long-term adoption of lean manufacturing. Procedia CIRP, 116, 245–250. https://doi.org/10.1016/j.procir.2023.02.042

Kristyanto, A., & Kusdiartini, V. (2021). Perencanaan Budaya 5S (Seiri, Seiton, Seiso, Seiketsu, Shitsuke) pada Anugrah Jaya Motor Semarang. JEMAP: Jurnal Ekonomi, Manajemen, Akuntansi, Dan Perpajakan, 4(1), 163–200.

Putra, B. H., & Haryadi, B. (2014). Analisis Prinsip Kerja 5S (Seiri, Seiton, Seiso, Seiketsu, Setsuke) pada CV. Kokoh Bersatu Plastik Surabaya. Agora : Jurnal Penelitian Dan Karya Ilmiah Arsitektur Usakti , 2(2).

Restuputri, D. P., & Wahyudin, D. (2019). Penerapan 5s (Seiri, Seiton, Seiso, Seiketsu, Shitsuke) Sebagai Upaya Pengurangan Waste Pada Pt X. Jurnal Sistem Teknik Industri (JSTI), 21(1), 51–63.

Roswandi, I., Junaedi, D., Riadi, S., Rokhim, M., Program, ), & Industri, S. T. (2021). Implementasi Prinsip Kerja 5S untuk Meningkatkan Efisiensi Waktu Produksi Studi Kasus : di Section Injection di PT HBR. Urnal Penelitian Dan Aplikasi Sistem & Teknik Industri (PASTI), XV(3), 320–329.

Shahriar, M. M., Parvez, M. S., Islam, M. A., & Talapatra, S. (2022). Implementation of 5S in a plastic bag manufacturing industry: A case study. Cleaner Engineering and Technology, 8. https://doi.org/10.1016/j.clet.2022.100488

Siska, M., & Sari, L. F. (2016). Analisis Prinsip Kerja 5S dan Motivasi Karyawan di PT. Jasa Barutama Perkasa Pekanbaru Riau. Jurnal Sains, Teknologi Dan Industri, 14(1), 57–65. http://ejournal.uin-suska.ac.id/index.php/sitekin

Sunmola, F., Mbafotu, O. R., Salihu-Yusuf, M. L., & Sunmola, H. O. (2024). Lean green practices in Automotive Components Manufacturing. Procedia Computer Science, 232, 2001–2008. https://doi.org/10.1016/j.procs.2024.02.022

Widiwati, I. T. B., Liman, S. D., & Nurprihatin, F. (2024). The implementation of Lean Six Sigma approach to minimize waste at a food manufacturing industry. Journal of Engineering Research (Kuwait). https://doi.org/10.1016/j.jer.2024.01.022