Metode HIRADC untuk Mengidentifikasi Risiko Kerja di Lapangan A Penumpukan Petikemas PT XYZ

Gracia Wiranatalie Damanik; Rizqi Novita Sari

doi:10.37090/indstrk.v9i2.2043

Authors

Gracia Wiranatalie Damanik Universitas Pembangunan Nasional "Veteran" Jawa Timur
Rizqi Novita Sari Universitas Pembangunan Nasional "Veteran" Jawa Timur

DOI:

https://doi.org/10.37090/indstrk.v9i2.2043

Abstract

Occupational safety in the container stacking yard of PT XYZ is a primary concern due to the high potential for accidents that can harm both workers and the company. This study aims to identify and assess the risks of occupational accidents in the container stacking yard of PT XYZ and to provide recommendations to improve occupational safety. The HIRADC (Hazard Identification, Risk Assessment, and Determining Control) method was used in this research. The results showed that there are many potential hazards, such as being struck by containers, being caught in heavy equipment, and extreme environmental conditions. Through the HIRADC method, it was found that risks were categorized as low, moderate, high, and very high. Therefore, it is expected that the company can reduce the accident rate and create a safer working environment.

Keywords: HIRADC, Container, Occupational Safety, Workplace Safety

Downloads

Download data is not yet available.

References

Achmad, C., Sugeng, S., T, S., Erwin, S., & Risa, N. (2020). Penerapan Metode Hiradc Sebagai Upaya Pencegahan Risiko Kecelakaan Kerja Pada Divisi Operasi Pembangkit Listrik Tenaga Gas Uap. Jurnal Bisnis Dan Manajemen (Journal of Business and Management), 20(2), 41–64. https://jurnal.uns.ac.id/jbm/article/view/54633

Aristawati, N., & Hidayat, W. (2024). Identifikasi risiko strategis dalam meningkatkan. Jurnal Manajemen Pendidikan, 3(2), 211–222. https://journal3.uin-alauddin.ac.id/index.php/eduleadership/article/view/43544

Doda, D. V. ., & Pangaribuan, M. (2022). Dasar kesehatan dan keselamatan kerja: Hazard/Bahaya di tempat kerja. https://scholar.google.co.id/citations?view_op=view_citation&hl=en&user=o4oFbuUAAAAJ&cstart=20&pagesize=80&sortby=pubdate&citation_for_view=o4oFbuUAAAAJ:abG-DnoFyZgC

Handayani, D. I. (2017). Teknik Mitigasi Mencapai Zero Work Accident. 164. Teknik Mitigasi Dan Strategi Mencapai Zero Work Accident

Kurnia, G., Prasetiyono, A. K., Refiawan, A. M., Hibatullah, M., & Zulvia, F. E. (2021). Perancangan Tata Letak Lapangan Penumpukan Peti Kemas (Studi Kasus Pelabuhan Sorong). Logistik, 14(2), 1–16. https://doi.org/10.21009/logistik.v14i2.21547

Manik, H., Puspasari, V. H., Nuswantoro, W., & Purwantoro, A. (2021). Kunci Utama Pelaksanaan K3 Pada Proyek Pembangunan Gedung Muhammadiyah Palangka Raya Kampus II Di Saat Pandemi. Jurnal Civil Engineering Study, 1, 1–5.

Marasaoly, N., Sabaruddin, S., & Nasrun, N. (2022). Analisis Kinerja Pelayanan Operasional Peti Kemas Di Labuhan Babang Kabupaten Halmahera Selatan. Jurnal Simetrik, 11(2), 451–456. https://doi.org/10.31959/js.v11i2.821

Mentari Ramadhania, Nazarwin Saputra, Dadang Herdiansyah, D. (2021). Analisis Hazard Identification, Risk Assesment, Determining Control (Hiradc) Pada Aktivitas Kerja Di Ud Ridho Abadi Tangerang Selatan Tahun 2020. Environmental Occupational Health and Safety Journal, 2(1), 59–68.

Nurhadini, A., Rafie, & Indrayadi, M. (2019). Optimasi Pelayanan Bongkar Muat Peti Kemas Di Pelabuhan Dwikora Pontianak. Jurnal Elektrik Laut Sipil Tambang, 6(1), 1–11.

Pizaro, L. V., Efendy, N. M., & Andivas, M. (2024). Analisis Tingkat Risiko Bahaya Area Kerja Laundrybox dengan Metode HIRARC. Industrika : Jurnal Ilmiah Teknik Industri, 8(2), 325–332. https://doi.org/10.37090/indstrk.v8i2.1326

Pratama, I. L., Heitasari, D. N., & Putri, B. F. (2023). Optimasi Utilitas Alat RTG Dan Lapangan Penumpukan Petikemas Pada Kegiatan Impor Di Pt . Terminal Petikemas Surabaya. 1(2), 81–87.

Septiani, R., & Noverly, D. (2024). Analisis Risiko Keselamatan dan Kesehatan Kerja (K3) di PT. Gamma Mandiri Teknik Menggunakan Metode FMEA. Industrika : Jurnal Ilmiah Teknik Industri, 8(1), 187–195. https://doi.org/10.37090/indstrk.v8i1.1401

Setiawan, L., Rahmatullah, A., Muhammad, I., Rini, A. S., Hanan, S., & Pratama, T. R. H. (2024). Penerapan K3 Menggunakan HIRARC (Hazard Identification Risk Assessment and Risk Control) pada Perusahaan Konstruksi di Cilegon. Industrika : Jurnal Ilmiah Teknik Industri, 8(2), 268–278. https://doi.org/10.37090/indstrk.v8i2.1516

Sumantri, A. S. (2020). Pengaruh Manajemen K3, Perilaku Tenaga Kerja dan Alat Pelindung Diri terhadap Keselamatan Tenaga Kerja Bongkar Muat di Terminal Nilam Tanjung Perak Surabaya. Jurnal Ilmiah Ekonomi Dan Bisnis, 13(1), 135–140. http://journal.stekom.ac.id/index.php/E-Bisnis■page135

Zidane, A., & Nuraini, U. (2024). Volume 8 No . 4 Oktober 2024 Penilaian Risiko Kecelakaan Kerja dengan Metode Job Safety Analysis dan Risk Assessment pada PT . Asia Pacific Fibers P-ISSN : 2776-4745. 8(4).