Analisis Pengoptimalan Cycle Time Distribusi Semen: Perbandingan Satu dan Dua Kompresor di PT. X

Tito Dwi Nugroho; Minto Waluyo

doi:10.37090/indstrk.v9i3.2104

Authors

Tito Dwi Nugroho Universitas Pembangunan Nasional "Veteran" Jawa Timur
Minto Waluyo Universitas Pembangunan Nasional "Veteran" Jawa Timur

DOI:

https://doi.org/10.37090/indstrk.v9i3.2104

Abstract

Distribution efficiency in the cement industry is a key factor that influences the sustainability of operations and company competitiveness. One critical aspect is managing distribution cycle time, which involves the process of loading cement from the factory to the ship. This research was conducted at PT. X to analyze cycle time optimization in cement distribution using discrete simulation methods. This research is the importance of reducing cycle time to avoid delivery delays which can result in fines (demurrage) and operational losses. The simulation results show that using one compressor requires an average of 108 minutes per trip, so that to complete 5 trips per trailer it takes a total of around 11.3 hours. While this duration still allows for the delivery target of 1,800 tons in 12 hours to be achieved, this approach leaves little room to overcome potential operational obstacles, such as technical glitches or delays, thereby increasing the risk of late fines. As a solution, the addition of one compressor has been proven to reduce loading time to 54 minutes per trip, reducing the total time for 5 trips to only 6.8 hours, providing significant efficiency and increasing operational reliability. This research concludes that adding a compressor can significantly reduce the risk of delays, increase efficiency and support the sustainability of company operations.

Keywords : Cycle Time, Distribution, Discrete Simulation, Loading

Downloads

Download data is not yet available.

References

Amalia Dwi Cahyani’, Najwa Shanaya Aisha, Andi Intan Rachmadhani, Vincent, Gina Rahmadani, Dulia Ulfani, Rubby Rahman Tsani", M. H. (2024). Analisis Optimalisasi Distribusi Logistik Untuk Meningkatkan Efisiensi dan Keefektifan Operasional Pada PT. XX (pp. 654–665). INDUSTRIKA.

Andalucia, S. (2023). OPERASI DAN TROUBLESHOOTING GAS COMPRESSOR DI STASIUN KOMPRESOR GAS (SKG) LEMBAK PT PERTAMINA HULU ROKAN REGION 1 ZONA 4. Cakrawala Ilmiah, 2(5), 1–23.

Dian Aisyah Rahayu, C. D. D. (2023). EVALUASI DISTRIBUSI MANAJEMEN RANTAI PASOK KOMODITAS BAHAN BAKU INDUSTRI SEMEN (STUDI KASUS PADA PT X). Journal of Economics And Business UBS, 12(4), 1–23.

Ferry Hermawan, Tri Susanto, Bambang Purwanggono, Bagus Hario Setiadji, A. N. P. (2024). Kapabilitas Dinamik Pada Akselerasi Produksi Preacast Girder Tipe U Pada Proyek LRT Jabodetabek (pp. 83–94). Ilmu dan Terapa Bidang Teknik Sipi.

Geyska, Arini Anestesia Purba, Andi Idhil Ismail, M. (2024). Minimasi Waktu Tunggu Proses Disassambely Engine dengan Pendekatan Lean Manufacturing di PT OPQ (pp. 800–812). INDUSTRIKA.

Halim, J. A., & Widayana, I. G. A. (2022). Perancangan Alat Prediksi Cycle Time menggunakan Macro Excel dengan Metode Regresi Linear pada Produksi 1 Line 4 CV. Sinar Baja Electric. Jurnal Titra, 10(2),209216.https://publication.petra.ac.id/index.php/teknikindustri/article/view/12872%0Ahttps://publication.petra.ac.id/index.php/teknik-industri/article/download/12872/11172

Hasanah, T. U., Wulansari, T., Putra, T., & Fauzi, M. (2020). Penerapan Lean Manufacturing dengan Metode Takt Time dan FMEA untuk Mengidentifikasi Waste pada Proses Produksi Steril PT.XYZ. Jurnal Rekayasa Sistem & Industri (JRSI), 07, 89. https://doi.org/10.25124/jrsi.v7i2.435

Joshua Gianfranco, Tasya Mursalina, M. F. (2024). ANALISIS MODEL TRANSSHIPMENT DALAM PROSES DISTRIBUSI PRODUK SEMEN DI CV BANGUN KREASI ABADI (pp. 52–62). INDUSTRIKA.

Kemas Moh. Ade Isnaeni, Sarmila Tri Ayu, S. (2023). OPTIMALOSASI CYCLE TIME AAT ANGKUT DUMP TRUCK CGE37084R UNTUK PENCAPAIAN TARGET PRODUKTIVITAS PENGANGKUTAN BATUBARA DI PT WAHANA BANDHAWA KENCANA SITE PT BARA ALAM UTAMA LAHAT, SUMATRA SELATAN. jurnal Cakrawala Imiah.

Marpaung, S. B., Ritonga, D. A. A., & Irwan, A. (2021). Analisa Risk Priority Number (Rpn) Terhadap Keandalan Komponen Mesin Thresher Dengan Menggunakan Metode Fmea Di Pt.Xyz. JiTEKH, 9(2), 74–81. https://doi.org/10.35447/jitekh.v9i2.427

Nur, Z., Kadir, R., & Toaha, M. (2022). Dampak Demurrage Terhadap Penjualan Ekspor di PT Semen Tonasa. SEIKO : Journal of Management & Business, 4(3), 496–501. https://doi.org/10.37531/sejaman.v4i3.2399

Sahar, D. P., Afifudin, M. T., & Indah, A. B. R. (2020). Analisis Investasi Kapal Dry-Bulk Carrier Dengan Menggunakan Sistem Dinamik. Arika, 14(2), 93–100. https://doi.org/10.30598/arika.2020.14.2.93

Sugeng Haryadi, S. A. P. (2024). Manajemen Perawatan Kompresor Udara Pada Mesin Induk Di KM UMSINI (pp. 117–130). Jurnal Imu Teknik dan Teknoogi Maritim.

Suradi, S., Hanafie, A., Samudera Irwan, M. R., & Amahoru, A. (2022). PERANCANGAN SISTEM DISTRIBUSI SEMEN CURAH PADA PT SEMEN TONASA (PERSERO) MENGGUNAKAN METODE ANALYTIC HIERACHY PROCESS (AHP) (Studi Kasus PT. Semen Tonasa). ILTEK : Jurnal Teknologi, 17(02), 135–141. https://doi.org/10.47398/iltek.v17i02.23

Tama, M. I., Aqsha, B. D., & Rosyidiin, A. F. (2023). Pengukuran Utilitas Container Dock Station Menggunakan Pendekatan Simulasi Diskrit Pada Terminal Teluk Lamong Surabaya. Jurnal Tecnoscienza, 7(2), 429–444. https://doi.org/10.51158/tecnoscienza.v7i2.943

Wahib, A., Haitimi, A., Lestari, R. A., Wijaya, U., Surabaya, K., Authors, C., & Authors, C. (2024). CORPORATE SOCIAL RESPONSIBILITY DAN PEMBANGUNAN DESA: (Studi Kasus Kebijakan CSR PT Solusi Bangun Indonesia dalam Mendukung Kemandirian Pembangunan Desa Merkawang Kecamatan Tambakboyo Kabupaten Tuban). Ilmu Sosial Dan Ilmu Politik, 4(1), 27–42.

Widya Purnamasar, Ahadiati Rohmatia, M. I. (2021). Pengaruh Harga Promosi dan Saluran Distribusi Semen Gresik Terhadap Minat Beli Konsumen (Studi Kasus di Distributor PT Abadi Putera Wirajaya) (pp. 41–50). Manajemen, Ilmu EkonomiKreatif dan Bisnis.