Pengukuran Efektivitas Kinerja Mesin Rapier 180 Menggunakan Metode Overall Equipment Effectiveness (OEE)

Dewina Sekar Suci; Nofa Dwi Rahmawati; Bekti Nugrahadi

doi:10.37090/indstrk.v9i3.2133

Authors

Dewina Sekar Suci Universitas Sahid Surakarta
Nofa Dwi Rahmawati Universitas Sahid Surakarta
Bekti Nugrahadi Universitas Sahid Surakarta

DOI:

https://doi.org/10.37090/indstrk.v9i3.2133

Abstract

Optimal and maximal production is determined by three factors there is machines, raw material and human. PT AM is a weaving company which use Rapier 180 Loom machines in their process production. In the last five months, historically, the production of the Rapier 180 engine at PT. AM shows a comparison of the quality of grades A was decreased. So, it is necessary to measure the performance of the Rapier machine as an evaluation for the company to determine the next step. The observation method used is the OEE (Overall Equipment Effectiveness) which is a method to evaluate the magnitude of the performance and reliability of a machine. Several data are need for calculation about the Rapier 180 such as target production, actual production, product defects, target run hours, actual run hours, and stop hours. Based on OEE calculations, we find that the Rapier 180 machines in PT AM have a avaibility rate 96%, performance rate 96%, and Quality rate 57% base from that we find OEE of rapier is 52% and based on JIPM (Japan Institute of Plant Maintenance) the performance of the machine is classified as reasonable production but shows that there is still a lot of room for improvement. The factors that cause the OEE value of the Rapier 180 engine to only reach 52% are the lack of maintenance, lack of control and quality checks, and the environment around the machine.

Keywords: Effectiveness, OEE, Performance, Production Process, Rapier Machine

Downloads

Download data is not yet available.

References

Aldha, Aldha, and Asep Erik Nugraha. 2024. “Analisis Kinerja Mesin Welding Dengan Menggunakan Metode Overall Equipment Effectiveness (OEE) Pada Divisi Alat Berat Di PT. XY.” Industrika : Jurnal Ilmiah Teknik Industri 8(3):576–86. doi: 10.37090/indstrk.v8i3.1399.

Anggraini, Meilani, Ahmad Sidiq, and Intan Hartiwi. 2025. “Volume 9 No . 1 Januari 2025 Analisis Perhitungan Efektivitas Mesin Mobile Crusher Menggunakan Metode Overall Equipment Effectiveness ( OEE ) Di PT . X P-ISSN : 2776-4745.” 9(1).

Dwiputra, Falsha Satria, Wahyudin Wahyudin, and Billy Nugraha. 2024. “Analisis Efektivitas Line Cubing 2 Dengan Menggunakan Metode Overall Equipment Effectiveness Di PT. BM.” Industrika : Jurnal Ilmiah Teknik Industri 8(2):218–26. doi: 10.37090/indstrk.v8i2.1202.

Eshardiansyah, Muhammad Carvin, Fahriza Nurul Azizah, and Wahyudin Wahyudin. 2024. “Analisis Mesin CNC Milling Dengan Metode Overall Equipment Effectiveness Dalam Mendeteksi Six Big Losses Di PT. A.” Industrika : Jurnal Ilmiah Teknik Industri 8(2):227–37. doi: 10.37090/indstrk.v8i2.1249.

Gianfranco, Joshua, Muhammad Iqbal Taufik, Febri Hariadi, and Muchammad Fauzi. 2022. “Pengukuran Total Productive Maintenance (Tpm) Menggunakan Metode Overall Equipment Effectiveness (Oee) Pada Mesin Reaktor Produksi.” Jurnal Lebesgue : Jurnal Ilmiah Pendidikan Matematika, Matematika Dan Statistika 3(1):160–72. doi: 10.46306/lb.v3i1.109.

Hadi, Suryadi. n.d. “1,2,3,4.” 2558–71.

Hafiz, Khoirul, and Erwin Martianis. 2019. “Analisis Overall Equipment Effectiveness (OEE) Pada Mesin Caterpillar Type 3512B.” SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin 13(2):87. doi: 10.24853/sintek.13.2.87-96.

Hermawan, Anggi, Doto Doto, and Rahmat Akmal. 2022. “Penerapan Metode Overall Equipment Effectiveness (Oee) Dan Failure Mode and Effect Analysis (Fmea) Pada Mesin Adhesive Di Pt. Asia Chemical Industry.” Jurnal Ilmiah Teknik Dan Manajemen Industri 2(2):197–220. doi: 10.46306/tgc.v2i2.38.

Kameiswara, Restyoko Adham, Arif Budi Sulistiyo, and Wawan Gunawan. 2018. “Analisa Overall Equipment Effectiveness (OEE) Dalam Mengurangi Six Big Losses Pada Cooling Pump Blower Plant PT. Pabrik Baja Terpadu.” Jurnal InTent 1(1):67–78.

Lakho, Tahir Hussain, Muhammad Ali Khan, Shahryar Irfan Virk, and Aamir Ali Indher. 2020. “Implementation of Overall Equipment Effectiveness (Oee) in Maintenance Management.” Proceedings of the International Conference on Industrial Engineering and Operations Management 59:3087–98.

Ningsih, Noviya Adi, and Rahmaniyah Dwi Astuti. 2022. “Analisis Pengukuran Kinerja Produksi Loom Dengan Metode OMAX Scoring System Pada Unit Weaving PT . Dan Liris.” Seminar Dan Konferensi Nasional IDEC 2022 1–9.

Oee, Use, Drive Significant, and Process Improvement. n.d. And Improving Overall Equipment Effectiveness.

Overall, Configuring, Equipment Effectiveness, Dipankar Saha, Mahalakshmi Syamsunder, and Sumanta Chakraborty. n.d. Manufacturing Performance Management Using SAP OEE Per Formance.

Pujianto, Hendri. 2021. “Reduksi Limbah Benang Cath Cord Pinggiran Kain Untuk Penghematan Bahan Baku Benang Cath Cord Dan Biaya Produksi Pada Mesin Tenun Rapier PT XYZ Dengan Percobaan Produksi Pada Laboratorium Pertenunan AK-Tekstil Solo.” Majalah Teknik Industri 29(1):56–61.

Ramadian, Demi, Yoga Pratama, and Rizaldi Sardani. 2022. “Analisis Efektivitas Mesin Screw Press Menggunakan Metode Overall Equipment Effectiveness Pada PT Bintara Tani Nusantara.” 03(01):36–46.

Simanungkalit, Patardo, Refdilzon Yasra, and Bambang Wahyu Widiodo3. 2016. “PERENCANAAN SISTEM PERAWATAN ALAT ANGKAT KAPASITAS 5 TON DENGAN METODE PREVENTIVE MAINTENANCE (Studi Kasus PT.Trikarya Alam ) THE MAINTENANCE SYSTEM PLANNING OF LIFT TOOL WITH CAPACITY 5 TON USING PREVENTIVE MAINTENANCE METHOD (Case Study PT.TRIKARYA ALAM.” Profisiensi 4(1):47–57.

Wahyudiyanto, Teddy, and Hana Catur Wahyuni. 2023. “Quality Control To Reduce Defects in Ceramic Production Using Six Sigma Method and Root Cause Analysis.” Indonesian Journal of Innovation Studies 22. doi: 10.21070/ijins.v22i.1041.