Usulan Perbaikan Mutu CPO dengan Metode Six Sigma pada PT. PSU PKS Tanjung Kasau
DOI:
https://doi.org/10.37090/indstrk.v9i3.2158Abstract
PT. PSU Tanjung Kasau is one of the BUMD’s of North Sumatra Province in the agricultural sector. The product produced is Crude Palm Oil (CPO). CPO has quality parameters, namely free fatty acid (FFA) content, water content and dirt content. Based on data on the results of CPO production quality in January and February 2024, there are still several quality parameters that exceed the standards set by the company. Therefore, to determine the level of quality, factors that cause a decrease in the CPO level, and proposed improvements, research was carried out using the Six Sigma method with the stages of define, measure, analyze, improve and control (DMAIC). After processing, the CPO DPMO value was obtained of 676,451.85 with a sigma value of 1.04. Then using the Pareto diagram, it was obtained that the water content and free fatty acid content caused a decrease in CPO quality. Then based on the fishbone diagram, the human factor was obtained which was a lack of discipline, the material factor was bad qualityof TBS, and the machine factor was less than optimal machine performance and the method factor was not in accordance with the SOP. Proposed improvements to overcome the problems include conducting training and evaluation, increasing the supply of TBS and improving infrastructure, conducting regular monitoring and maintenance of machines, improving SOP’s and implementing SOP’s so that corporate governance can run well.
Keywords : CPO, DMAIC, Quality, Six Sigma
Downloads
References
Aini, L. Q., & Sukanta, S. (2024). Pengendalian Kualitas Produk Arummanis dengan Peta Kendali P dan Diagram Fishbone di UMKM Arummanis AT. Industrika : Jurnal Ilmiah Teknik Industri, 8(3), 527–535. https://doi.org/10.37090/indstrk.v8i3.1414
Aliyya Rizqi Amani, & Wahyudin, W. (2024). Pengendalian Kualitas Produk Part Grip Model D55L Dengan Pendekatan Six Sigma Di PT.Z. Industrika : Jurnal Ilmiah Teknik Industri, 8(2), 205–217. https://doi.org/10.37090/indstrk.v8i2.1194
Analisa ALB kernel. (n.d.).
Dalam, A. (2016). KELAPA SAWIT PT . BIMA PALMA NUGRAHA Burhanudin Al Ghozali Universitas Brawijaya Prof . Dr . Surachman . SE ., MSIE Kelapa sawit dengan produk turunannya yaitu minyak kelapa sawit ( Crude Palm Oil - CPO ) merupakan salah satu komoditas unggulan ekspor non. April.
Gratia, T., Tarigan, R., Sukarsono, B. P., Industri, D. T., Teknik, F., Diponegoro, U., Soedarto, J. P., & Tembalang, K. U. (2021). PENGENDALIAN KUALITAS PRODUK CRUDE PALM OIL ( CPO ) DENGAN METODE SIX SIGMA ( Studi Kasus PT Supra Matra Abadi ).
Hartini, S. (2021). Buku Ajar Lean Manufacturing System (Vol. 01).
Lestari, Y. E., Rifai, A., & Muwardi, D. (2019). Analisis Produktivitas Pengolahan Minyak Kelapa Sawit denganMetode Marvin E. Mundel. Journal of Agribusiness and Community Empowerment (JACE), 2(2).
Melgandri, S., & Chairani, L. (2022). Analisis Pengendalian Kualitas Pada Proses Produksi Reinf Rr No.1 Seat Leg Rr Di Pt Xx. Industrika : Jurnal Ilmiah Teknik Industri, 6(2), 77–85. https://doi.org/10.37090/indstrk.v6i2.653
Napitu, T. H., Harahap, U. N., & Suratman, J. (2022). Pengendalian kualitas produk pulp dengan menggunakan metode Kaizen di PT. Toba Pulp Lestari, Tbk. Jurnal VORTEKS, 3(1). https://doi.org/10.54123/vorteks.v3i1.155
Padang, I. (2019). Analisa Pengendalian Kualitas Crude Palm Oil (Cpo) Dengan Metode Six Sigma Pada Pt Tales Inti Sawit-Bangun Purba. 1–91.
Parhusip, B. R., & Pd, M. (2023). Quality Control Pedoman Penjaminan Mutu dan Pengendalian Mutu. 1–146. https://repository.penerbiteureka.com/media/publications/560791-quality-control-pedoman-penjaminan-mutu-6a573ec8.pdf
Rantawi, A. B., Mahfud, A., & Situmorang, E. R. (2017). Industrial Management Korelasi Antara Kadar Air pada Kernel Terhadap Mutu Kadar Asam Lemak Bebas Produk Palm Kernel Oil Yang Dihasilkan (Studi Kasus pada PT XYZ). In Industrial Engineering Journal (Vol. 6, Issue 1).
Rasyid, M. I., Swandika, D., & Nurhidayatullah, N. (2022). Analisa Mutu Crude Palm Oil (CPO) Pada Storage Tank Di PT. Socfin Indonesia Kebun Seunagan. Jurnal Teknologi Pengolahan Pertanian, 4(2), 40. https://doi.org/10.35308/jtpp.v4i2.6336
Sirine, H., Kurniawati, E. P., Pengajar, S., Ekonomika, F., Bisnis, D., & Salatiga, U. (2019). Pengendalian Kualitas Menggunakan Metode Six Sigma (Studi Kasus Pada PT Diras Concept Sukoharjo). AJIE-Asian Journal of Innovation and Entrepreneurship, 02(03), 2477–3824. http://www.dirasfurniture.com
Syaifullah, A., M. (2021). Penerapan Pengendalian Kualitas Produksi Crude Palm Oil ( Cpo ) Dengan Metode Six Sigma Pada Pt Perkebunan Nusantara XIV Di Luwu Timur.
Syukron, A., & Kholil, M. (2012). Six Sigma Quality for Business Improvement (pp. 1–261). http://repository.unugha.ac.id/id/eprint/874
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
