Analisis Penerapan Metode Hazard Identification Risk Assessment and Risk Control (HIRARC) di PT YZ

Naufal Adetresna Pratama; Dene Herwanto

doi:10.37090/indstrk.v9i3.2165

Authors

Naufal Adetresna Pratama Universitas Singaperbangsa Karawang
Dene Herwanto Universitas Singaperbangsa Karawang

DOI:

https://doi.org/10.37090/indstrk.v9i3.2165

Abstract

This study aims to analyze the implementation of the Hazard Identification Risk Assessment and Risk Control (HIRARC) method at PT. YZ, a manufacturing company engaged in cartons and packaging. The HIRARC method consists of three main steps: hazard identification, risk assessment, and risk control. The implementation of this method aims to minimize potential workplace accidents and ensure worker safety. The research was conducted through direct observation, interviews, and data collection in the warehouse. The identification results revealed several potential hazards, such as slipping, inhaling dust, chemical exposure, and unsafe storage practices. Based on risk matrix analysis, it was found that the extreme risk was inhaling dust, while the high risk was chemical exposure. Risk control measures were implemented through the use of personal protective equipment (PPE) such as helmets, masks, and safety shoes, as well as ventilation improvement, safety training, and rearrangement of storage systems. In conclusion, the application of the HIRARC method provides a systematic approach to improving workplace safety at PT. YZ. Recommendations for the company include enhancing safety training and implementing routine inspections to ensure a safer working environment.

Keywords: HIRARC, Hazard Identification, Occupational Safety, Risk Assesssment

Downloads

Download data is not yet available.

References

Ramli, S. (2013). Sistem Management Keselamatan dan Kesehatan Kerja OHSAS 18001. Jakarta: PT. Dian Rakyat.

Reason. (2021). Designing for an Older Population . Journal Human Factors, 263-272.

Organization, M. I. (2001). Guidelines on Occupational Safety and Health Management System. Geneva, Switzerland: ILO.

Supriyadi, R. F. (2017). Identifikasi Bahaya dan Penilaian Risika pada Divisi Boiler menggunakan Metode Hazard Identification Risk Assessment and Risk Control (HIRARC). Journal of Industrial Hygiene and Occupational Health , 161-177.

Suma'mur. (2021). Komitmen Manajemen dalam Pencegahan Kecelakaan Kerja. Jurnal Widiya Praja, 5-9.

Hania M, N. R. (2020). Identifikasi Risiko Keselamatan Kerja. Environmental Occupational Health and Safety Journal, 164-174.

Suharjo, B., & Arifin, M. (2014). Analisa Risiko dan Implementasi Metode Hirarc (Hazard Identification, Risk Assessment and Risk Control) Pada Satuan Penyelam di Dislambair Koarmatim. Journal Asro, 1,, 1– 9.

Gunawan, A. A. (2015). Perbaikan Keselamatan dan Kesehatan Kerja dengan Metode HIRARC di PT. Sumber Rubberindo Jaya. Jurnal Titra, 3(2), 421–426.

Saputra, G., Supriyadi, S., & Dwiputra, G. A. (2016). Perancangan Identifikasi Bahaya di Area Feed Water System Boiler Menggunakan Metode HAZOP (Hazard and Operability Study). Jurnal INTECH Teknik Industri Universitas Serang Raya, 2 (2 S), 49-54.

Supriyadi, S., Nalhadi, A., & Rizaal, A. (2015). Identifikasi Bahaya dan Penilaian Risiko K3 pada Tindakan Perawatan & Perbaikan Menggunakan Metode HIRARC (Hazard Identification and Risk Assesment Risk Control) pada PT. X. . Prosiding Seminar Nasional Riset Terapan| SENASSET, 281-286.

Suwarno, A. (2015). Keselamatan dan Kesehatan Kerja. Jakarta: Gramedia Pustaka Utama.

Adriansyah, A. (2021). Kepatuhan Penggunaan Alat Pelindung DIri (APD) Masker ditinjau dari Pengetahuan dan SIkap Pekerja. Jurnal Ilmu Kesehatan Masyarakat, Vol 17 No 1.

Anggraheni. (2007). Sistem Manajemen K3 dalam Upaya Meminimalisasi Kecelakaan Kerja di PT. Petronika Gresik. Jurnal Teknik Industri Universitas Negeri Yogyakarta , 17-19.

Wijaya, A., Panjaitan, T. W. S., & Palit, H. C. (2015). Evaluasi Kesehatan dan Keselamatan Kerja dengan Metode HIRARC pada PT. Charoen Pokphand Indonesia. Jurnal TIrta, 3(1), 29-34.

Yuniarto, H. A. ( 2013). Perbaikan pada Fishbone Diagram Sebagai Root Cause Analysis Tool. Jurnal Teknik Industri, 3(3), 217-224.