Pengukuran Ergonomi Sikap Kerja Pengrajin Sulam Lampung dengan Metode RULA & REBA dan Rekomendasi Perbaikan

Indah Purnama Sari; Putri Endah Suwarni; Susanti Sundari; Jevri Buari; Agung Dwi Prasetyo

doi:10.37090/indstrk.v9i1.2179

Authors

Indah Purnama Sari Universitas Tulang Bawang
Putri Endah Suwarni Universitas Tulang Bawang
Susanti Sundari Universitas Tulang Bawang
Jevri Buari Universitas Tulang Bawang
Agung Dwi Prasetyo Universitas Tulang Bawang

DOI:

https://doi.org/10.37090/indstrk.v9i1.2179

Abstract

The ergonomic assessment of the working posture of traditional embroidery artisans in Lampung is necessary to uncover their working conditions and their impact on health, with the main complaint being significant musculoskeletal disorders. This study aims to identify the ergonomic risk levels of the artisans and provide recommendations for corrective measures. The research utilized the Nordic Body Map questionnaire to identify the body areas with the highest complaints, while ergonomic analysis was conducted using the Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA) methods. The findings revealed that the back (100%), buttocks (80%), lower neck (80%), right shoulder (80%), waist (70%), and upper neck (70%) were the areas with the highest complaints. The RULA score was 6 for embroidery and pattern-making activities, indicating that corrective actions are needed in the near future. The REBA scores were 5 for embroidery and 6 for pattern-making, emphasizing the urgency for improvement. Immediate corrective actions, such as the provision or replacement of ergonomic embroidery frames or tables, are required to reduce injury risks and enhance the occupational health of the artisans.

Keywords: Artisans, Ergonomic, Nordic Body Map, REBA, RULA

Downloads

Download data is not yet available.

References

Abdurrahim, H. S., Renny Septiari, and Thomas Priyasmanu. 2024. “USULAN DESAIN ERGONOMIS UNTUK ALAT PERAJANG PISANG BERDASARKAN EVALUASI POSTUR KERJA DI INDOCHIPS ALESHA TRIMULYA.” Jurnal Valtech 7(2):317–25.

Anton, Thista Kusuma. 2022. “Pemberdayaan Home Industry Melalui Kelompok Sari Delai Dalam Meningkatkan Kesejahteraan Sosial Masyarakat Desa Kalisari Kecamatan Cilongok Kabupaten Banyumas.”

Darussalam, Ridwan. 2022. “Analisis Penilaian Postur Kerja Karyawan Dengan Menggunakan Metode NBM, Rula Dan Reba.” Jurnal Indonesia Sosial Sains 3(09):1278–85.

Dzikrillah, Nurul, and Euis Nina Saparina Yuliani. 2015. “Analisis Postur Kerja Menggunakan Metode Rapid Upper Limb Assessment (Rula) Studi Kasus Pt Tj Forge Indonesia.” Jurnal Ilmiah Teknik Industri 3(3).

Fadhil, Mursyid Al. 2020. “Analisis Konsep Triple Helix Dalam Mendorong Pengembangan Industri Kreatif Sebagai Upaya Meningkatkan Kesejahteraan Masyarakat Menurut Perspektif Ekonomi Islam (Studi Pada Kelompok Masyarakat Pengrajin Tenun Sulam Tapis Di Pekon Argopeni Kecamatan Sumber .”

Hutabarat, Julianus. 2022. Pengantar Teknik Industri. Media Nusa Creative (MNC Publishing).

Joanda, A. Destha, and Bambang Suhardi. 2017. “Analisis Postur Kerja Dengan Metode REBA Untuk Mengurangi Resiko Cedera Pada Operator Mesin Binding Di PT. Solo Murni Boyolali.” in Seminar dan Konferensi Nasional IDEC. Vol. 2017.

Maureen, Bethania, Devine Adriella, Gashiela Regina, Gwyneth Patricia, Maria Jocelyn Poillot, Marini Yunita Tanzil, and Yohannes Somawiharja. 2021. “Desain Motif Tekstil Dengan Inspirasi Sulam Usus.”

NABILA, MAULIDIA. 2023. “PERKEMBANGAN USAHA SULAM USUS LAMPUNG DI DESA NATAR, KECAMATAN NATAR KABUPATEN LAMPUNG SELATAN (STUDI KASUS PADA HOME INDUSTRY NABILLA SULAM USUS).”

Regina, Salsabila Putri. 2024. “Kajian Gangguan Otot Dan Rangka Pada Pekerja Di CV Sedyo Mulyo Berdasarkan SNI 9011: 2021.”

Restiyani, Riska, and Susanti Sundari. 2021. “Analisis Postur Kerja Menggunakan Metode Rapid Upper Limb Assessment (Rula) Di Umkm Kerupuk Kemplang 32 Kecamatan Bumi Waras Bandar Lampung.” Ind. J. Ilm. Tek. Ind 5(1).

Safhira, Ira, and Chandra Satrya. 2021. “Kajian Tingkat Keparahan Postur Janggal Yang Berkontribusi Kepada Gangguan Sistem Muskuloskeletal (Studi Pustaka Naratif).” National Journal of Occupational Health and Safety 2(2):6.

Septiari, Renny. 2020. “Analisis Faktor-Faktor Yang Mempengaruhi Tingkat Kelelahan Pada Pekerjaan Berulang Di Industri Manufaktur.” Mekanika: Majalah Ilmiah Mekanika 19(1):14–21.

Sulaiman, Fahmi, and Yossi Purnama Sari. 2018. “Analisis Postur Kerja Pekerja Proses Pengeasahan Batu Akik Dengan Menggunakan Metode REBA.” Jurnal Optimalisasi 1(1).

Widiastuti, Untung, and Djati Poetryono Dharmosamoedero. 2015. “Peran Ergonomi Dalam Industri Terhadap Kecelakaan Kerja Berdasarkan Musculoskeletal Disorders (MSDs).” Jurnal Gaung Informatika 8(3).

Wijaya Sidik, Sidik. 2017. “Analisis Postur Kerja Untuk Mengurangi Risiko Musculoskeletal Disorders Menggunakan Metode Rapid Upper Limb Assessment (RULA)(Studi Kasus Pada Operator Shootblast PT ABA).”

Windusancono, Bambang Agus. 2021. “Upaya Percepatan Pertumbuhan Usaha Mikro Kecil Dan Menengah (Umkm) Di Indonesia.” Mimbar Administrasi Fisip Untag Semarang 18(1):1–14.

Zarkasyi, Muhamad Hikam Fauzi, Siti Hanan, Asih Setyo Rini, Ogie Kustandi, and Doto Doto. 2023. “ANALISIS POSTUR KERJA PADA SUPIR TRUK PT. ZAFANA MAS SAKTI MENGGUNAKAN METODE RULA DAN REBA.” Jurnal Ilmiah Teknik Dan Manajemen Industri 3(2):917–29.