Perancangan Design Troli dengan Metode Kansei Engginering
DOI:
https://doi.org/10.37090/indstrk.v9i3.2190Abstract
The application of assistive devices in the world of work does play an important role as well as always being considered. Operators at the PT PLN Tarakan Warehousing Work Unit in Ballikpapan City are experiencing problems in the operation of moving goods. This unit works traditionally with limited road access. The purpose of this research is to design lifting and transporting aids. The sample of this research is employees of the Warehousing Unit by applying purposive sampling technique. This research uses Kansei Engineering (KE) and Exploratory Factor Analysis (EFA) methods. The results illustrate that there are 77 Kansei Engineering Words (KKE) through identification of consumer needs through surveys and interviews. 77 KKE were treated based on similarity or similarity of meaning and obtained 10 KKE. Making questionnaires as many as KKE and then evaluated using the Linkert scale. The results of the questionnaire were tested for validity and reliability, and 50% of the KKE were valid and reliable. Factor analysis used EFA and resulted in 2 factors or stone patterns. The first factor consists of easy to use, strong, safe, and attractive. While the second factor consists of lightweight and attractive. Of the two factors, the second factor was chosen as a reference for designing the trolley design.
Keywords : Analysis Factor, Design Trolley, Exploratory Factor Analysis (EFA), Kansei Engineering
Downloads
References
Agus Cahyono Adi. (2024). Konsumsi Listrik Masyarakat Meningkat, Tahun 2023 Capai 1.285 kWh/Kapita. Kementerian Energi Dan Sumber Daya Mineral, 3. https://www.esdm.go.id/id/media-center/arsip-berita/konsumsi-listrik-masyarakat-meningkat-tahun-2023-capai-1285-kwh-kapita#:~:text=Secara tren%2C tercatat konsumsi listrik,1.173 kWh/kapita pada 2022
Andivas, M., Kisanjani, A., & Misrianto, M. (2023). Desain Alat Pemetik Buah Lada Dengan Menggunakan Metode Kansei Engineering Untuk Meningkatkan Produktivitas Pertanian. Jurnal Perangkat Lunak, 5(3), 362–368. https://doi.org/10.32520/jupel.v5i3.2796
Dhia, M., Syah, N., Cattleya, M., & Annissaa, P. (2025). Perencanaan ulang tata letak gudang PT . XYZ menggunakan metode Class Based Storage dan Systematic Layout Planning. JUTIN : Jurnal Teknik Industri Terintegrasi, 8(1), 958–965. https://doi.org/10.31004/jutin.v8i1.39526
Divibriani, M., & Herlina. (2025). Implementasi Pendekatan Activity Relationship Chart dalam Perancangan Tata Letak Gudang Baru untuk Memperpendek Perpindahan Material di UD . M. 9(1). https://jurnal.utb.ac.id/index.php/indstrk/article/view/1945/1076
Erzon, E. A., & Safirin, M. T. (2025). Optimalisasi Alur Kerja Pengambilan Material Processor dengan Metode Lean Manufacturing Pada PT . XYZ. X(1), 12422–12429. https://jse.serambimekkah.id/index.php/jse/article/view/722/556
Izhaq, D. C., & Dewi, S. (2025). Analisis risiko kecelakaan kerja pada proses pengantongan dan pergudangan dengan pendekatan House of Risk dan Fault Tree Analysis ( Studi kasus : Perusahaan Pupuk di Indonesia ). Jurnal Teknik Industri Terintegrasi, 8(1), 209–217. https://journal.universitaspahlawan.ac.id/index.php/jutin/article/view/39322
Johnson, R. A., & Wichern, D. (2018). Multivariate analysis. In Indonesian Treasury Review Jurnal Perbendaharaan Keuangan Negara dan Kebijakan Publik (Vol. 3, Issue 3). Wiley Online Library. https://doi.org/10.33105/itrev.v3i3.72
Meisufi, R. W., & Rochmoeldjati, R. (2025). Usulan perbaikan kinerja pergudangan berdasarkan perencanaan tata letak gudang bahan penolong dengan metode class based storage di PT XYZ ”. 8(1), 235–242. https://journal.universitaspahlawan.ac.id/index.php/jutin/article/view/39326
Muharram, A., Riyanto, F. S., Muslim, A. B., Sukarnoto, T., Komara, R., Annas, M. S., Supriyadi, Adinegoro, F., Mualana, M. I., Putri, L. R., Dewi, L. C., Rafi, M. A., & Novianto, S. (2025). Perancangan pembuatan dan pengujian prototipe pemindah barang dengan sistem pneumatik yang dikontrol menggunakan mikro kontrol arduino mega. Penelitian Dan Karya Ilmiah Lembaga Penelitian Universitas Trisakti, 10(1), 31–39. https://www.e-journal.trisakti.ac.id/index.php/lemlit/article/view/21805
Nuraini, S. A., & Dewi, S. (2025). Perancangan tata letak workshop menggunakan metode Systematic Layout Planning ( SLP ) di pergudangan Central Industrial Park. 8(1). https://journal.universitaspahlawan.ac.id/index.php/jutin/article/view/40280/26058
Nurzikiresa, R. (2022). Perancangan Alat Angkat Angkut Ergonomis Dengan Menggunakan Matriks House of Quality [Universitas Isalam Indonesia]. https://dspace.uii.ac.id/handle/123456789/38111
Sari, N. P., Indriany, D. F., Yunisyah, F., & Nabilla, N. (2025). Element Extraction in Packaging Design of Cireng Rujak X with Kansei Engineering Method. Jurnal Teknologi Universitas Muhammadiyah Jakarta, 17(1), 1–10. https://jurnal.umj.ac.id/index.php/jurtek/article/view/25684
Sari, N. P., Nursya’bani, J., & Sandjaja, S. A. P. (2025). Developing Innovative Packaging Designs Concept for Siomay Gondrong Msmes through Kansei Engineering. Jurnal Teknologi Universitas Muhammadiyah Jakarta, 17(1), 22. https://jurnal.umj.ac.id/index.php/jurtek/article/view/24795
Shinta, I. M., Nur, N. F., & Christian, A. W. (2016). Analisis Kelayakan Investasi Pengadaan Alat Angkut Material untuk Meminimalkan Biaya Logistik (Studi Kasus: PT. Tiki Cabang Solo). PERFORMA : Media Ilmiah Teknik Industri, 15(1), 10–16. https://doi.org/10.20961/performa.15.1.13738
Yohanny, D. K., Purwaningrum, L., & Mulyono, A. (2025). Application of Kansei Engineering in Various Train Compartment Designs To Determine the User’S Affective Response. IIUM Engineering Journal, 26(1), 466–479. https://doi.org/10.31436/IIUMEJ.V26I1.3239
Zainida, M. R., Kusumawardani, C. D., & Fitri, N. (2025). Perancangan Sistem Manajemen Gudang Non-Medis Menggunakan Metode Class-Based Storage Di RSUD UOBK. Industrika, 9(1), 154–163. https://jurnal.utb.ac.id/index.php/indstrk/article/view/1913/1087
Zainudin, M., & Jakaria, R. B. (2025). Designing attributes of a multifunction table using the kansei engineering method. TEKNOSAINS: Jurnal Sains, Teknologi Dan Informatika, 12(1), 8–14. https://doi.org/10.37373/tekno.v12i1.1182
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
