Analisis Pengendalian Kualitas Tahu dengan Metode New Seven Tools di UD. Graha Sukses Desa Pungka
DOI:
https://doi.org/10.37090/indstrk.v9i3.2199Abstract
UD Tofu Factory. Graha Sukses produces tofu, the results of observations in the field, there are tofu defects. The new seven tools method is seven tools that are able to explore data qualitatively. Affinity Diagram, Interrelationship, Tree diagram is the human factor, lack of caution in the printing process. Machine, manual printing tool. Environment, product storage location is less tidy and hot. Materials, less checked before processing. Methods, SOPs of printing equipment and printing processes are not paid attention to. Matrix diagrams, supervision of soaking, molding and moving products score 9 and training to workers related to SOPs and product quality score 8. Matrix data analysis, priority score of improvement proposals 3, improvement in UD paying attention to SOP score 2, training to workers score 2, supervision of workers score 2, scheduling maintenance of tools score 2, changing manual tools to automatic score 2, making checksheets score 2, checking raw materials before and after production score 2. The arrow chart of the critical path is the A-C-E-G path. PDPC diagram proposes improvements by conducting training to workers for SOPs, check sheets are used to recap defective products and checking materials before use.
Keywords: Disabled tofu, New seven tools, UD. Graha Sukses
Downloads
References
Husada Hadi Irwanto, R. I. N. U. (2021). Implementasi Failure Mode Effect Analysis (FMEA), Fault Tree Analysis (FTA), dan New Seven Tools sebagai Upaya Peningkatan Kualitas Produksi (Studi Kasus: Departemen Produksi PT. XYZ) | Husada | Prosiding SENASTITAN: Seminar Nasional Teknologi Industri Berkelanjutan. Seminar Nasional Teknologi Industri Berkelanjutan I (SENASTITAN I) . https://ejurnal.itats.ac.id/senastitan/article/view/1628
Jaka Radizanza, I. M. (2020). Analisa Pengendalian Kualitas Produksi Dengan Menggunakan Metode Seven Tools Quality Di PT. Borsya Cipta Communica. Jurnal Industri Dan Teknologi Samawa, 1(1), 17–21. https://jurnal.uts.ac.id/index.php/jitsa/article/view/583/420
Mashabai, I., Raya Olat Maras, J., Alang, B., Hulu, M., Sumbawa, K., Tenggara Barat, N., Teknik Industri Universitas Pamulang Jl Surya Kencana No, P., Bar, P., Pamulang, K., & Tangerang Selatan, K. (2023). Analisis Kualitas Keripik Tempe Di UD. Bu Las Desa Maluk Menggunakan Metode Voice Of Customer (VOC). Industrika: Jurnal Ilmiah Teknik Industri, 7(3), 292–300. https://core.ac.uk/download/pdf/588547193.pdf
Melgandri, S., & Chairani, L. (2022). Analisis Pengendalian Kualitas Pada Proses Produksi Reinf Rr No.1 Seat Leg Rr Di PT XX. Industrika: Jurnal Ilmiah Teknik Industri, 6(2), 77–85. https://pdfs.semanticscholar.org/b8b2/82fa49b61672b97e980179d79f4447eabbec.pdf
Oemar, H., Widianti, W., & Mulyati, D. S. (2020). Perbaikan Kualitas Produk Kaos Sablon Berdasarkan Area Kerja Menggunakan New Seven Tools Dan 5S. Journal of Industrial Engineering, Scientific Journal on Research and Application of Industrial System, 5(2), 89–100.
Purwanto Hendra, H. I. S. A. (2021). Analisis Kualitas Tahu Home Industry Di Dalam Proses Produksi Untuk Menjaga Kualitas Guna Meningkatkan Volume Penjualan (Studi Kasus Pada Desa Remen Kec. Jenu Kab. Tuban Jawa Timur). Jurnal Oportunitas Unirow Tuban, 2(2), 53–58. http://journal.unirow.ac.id/index.php/oportunitas/article/view/346/265
Putri Sorata Arinda, R. I. U. (2023, February). Analisis Pengendalian Kualitas Cacat Rework Dengan Metode FMEA Pada Intimates Wear Product. Jurnal Industri &Teknologi Samawa. https://jurnal.uts.ac.id/index.php/jitsa/article/view/2271/1286
Rahayuningtyas Wening, S. (2017). Analisis Pengendalian Kualitas Pada Produk Tahu Baxo Ibu Pudji Menggunakan Metode New Seven Tools (Studi Kasus pada CV. Pudji Lestari Sentosa). Industrial Engineering Online Journal, 6(4). https://ejournal3.undip.ac.id/index.php/ieoj/article/view/20399/19229
Rozi Fahrul, A. J. N. (2022). Upaya Perbaikan Kualitas Produk Batik Di Batik Allussan Menggunakan Metode Six Sigma Dan New Seven Tools. JCI: Jurnal Cakrawala Ilmiah, 1(11), 2972–2982. https://www.bajangjournal.com/index.php/JCI/article/view/2882/2049
Yanuar Ridho, E. P. P. (2023). Pengendalian Kualitas dalam Upaya Menurunkan Produk Cacat dengan Metode PDCA (Studi Kasus di PT. XYZ). Industrika: Jurnal Ilmiah Teknik Industri, 7(1), 1–12. https://jurnal.utb.ac.id/index.php/indstrk/article/view/855/588
Yusnita, E., & Riana Puspita, D. (2020). Analisa Pengendalian Kualitas Paving Block dengan Metode New Seven Tools di CV. Arga Reyhan Bahari Sumatera Utara. JIME (Journal of Industrial and Manufacture Engineering), 4(2), 2549–6336. https://doi.org/10.31289/jime.v4i2.3812
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
