PENGARUH DEFLECTOR CHUTE CV. 501 A MENJADI SIZING SCREEN UNTUK PENGOPTIMALAN KINERJA QUADROL CRUSHER DIJALUR UNLOADING SISTEM RCD 3 DI SATUAN KERJA OPERASI PT. BUKIT ASAM TBK, (STUDI KASUS UNIT PELABUHAN TARAHAN)

Authors

  • Daud Putra Irawan Program Studi Teknik Industri Fakultas Teknik Universitas Tulang Bawang Lampung
  • Burhan Nudin Program Studi Teknik Industri Fakultas Teknik Universitas Tulang Bawang Lampung

DOI:

https://doi.org/10.37090/indstrk.v4i2.232

Abstract

This research is motivated by the problems faced by PT.Bukit Asam Tbk. which is constrained by a decrease in productivity on the unloading path of the RCD 3 system, precisely in the quadrol crusher unit.The purpose of this study is to improve the capacity of the quadrol crusher by modifying the cv 501 a chute declector unit into a sizing screen (coal separator unit) so that the loading rate can be obtained in the design capacity. And the methodology used in this study is a fishbone method and pareto chart. Based on the results of research conducted using the fishbone method and pareto chart, it is known that the most dominant factors causing the decreasing working capacity of the rcd 3 unloading path are method and machine factors. And the conclusion of this research exhibited the fishbone method and pareto chart is by only modifying the cv 501 a chute deflector into a sizing screen that only costs a small modification, then PT. Bukit Asam Tbk will get the opportunity to re-optimize the rcd 3 unloading path near capacity design in order to increase profits for the company

References

Aulia, N. A., & Negara, K. P. (2016). Analisis dan Evaluasi Sisa Material Konstruksi Menggunakan Metode Pareto dan Fishbone Diagram (Studi Kasus pada Proyek Pembangunan Gedung Pascasarjana Universitas Islam Malang). Jurnal Mahasiswa Jurusan Teknik Sipil, 1(2), PP-649.

Agustiningsih Imdam Ahmad Fariz Rizki, I. (2017). Modifikasi Material Handling untuk Mengurangi Defect dan Lead Time pada Lini Pengecatan dalam Rangka Menerapkan Lean Six Sigma. Prosiding SAINTIKS FTIK UNIKOM, 2.

Ambrowo, R. (2018). Pengurangan Pemakaian Gas Produksi Dengan Modifikasi Alat Bantu Proses Pembuatan Base Powder Di PT.Sabun ( Doctoral dissertation, President University ).

Blog Dictio.Apa Yang Dimaksud Diagram Tulang Ikan ( https://www.dictio.id )

(Diakses tanggal 9 Februari 2020).

Ir.Sukandarrumidi, MSc . Ph.D .(2014 ). Batubara Dan Gambut .

Ikhwana, A. (2014). Perancangan Dan Perbaikan Sistem Kerja Dalam Upaya Mengendalikan Kecacatan Pada Proses Pembuatan Nata De Coco. Jurnal Kalibrasi, 12(1).

Ilmu manajemen industri ( 2017 ), Diagram Pareto (

http : // ilmu manajemen industri. com )

Kamus Besar Bahasa Indonesia (1990:589) Pengertian modifikasi.

Kurniasyari, F. H., Juniani, A. I., & Rachmat, A. N. (2018, December). Anaisis Kecelakaan Pekerjaan Ketinggian Menggunakan Metode EFCA, Fishbone, dan Pareto Analysis. In Seminar K3 (Vol. 2, No. 1,pp. 383-388).

Kristian, I. (2019). Upaya Penurunan Idle Pada Proses Produksi PT X Menggunakan Metode Fishbone Diagram. Jurnal Titra, 7(2), 145-152.

Permatasari, D. (2016). Analisa Teknis Modifikasi Accessory GearBox (AGB) Modul terhadap Sistem Pelumasan. Jurnal Teknik Mesin, 4(02).

Putra, A. P. (2017). Modifikasi Rancangan Runner Pada Mold Produk White Key Untuk Mengurangi Penggunaan Material Plastik AS ( Arcylonitrile-Styrene Resin ) ( Studi Kasus PT.KMK Plastics Indonesia ) (Doctoral dissetation, President University).

PT.Bukit Asam Tbk. 2019 ,Pengertian Batu Bara

(www.ptba.co.id) (Diakses tanggal 30 Januari 2020).

Ramadhani, D. S. (2018). Analysis Kualitas Pada Home Industry ahu Bulat Di Kepanjen Malang. Jurnal Valtech, 1(2), 131-136.

Sundari, S & Karwana, I (2018). Modifikasi Unit CV 507 dengan Menambahkan Bypass Chute dan Penyaring (Screen Sizer) Sebagai Pemisah Ukuran Batubara. Jurnal Industrika, Vol. 2 No. 2, 2018.

Tim Audit SOP .2018, Tata Cara Bongkaran

Babaranjang di RCD PT. Bukit Asam Tbk.

Mesin Reweaving Aomni Plus TC 800 Di PT.XX. In Seminar Nasional Teknik Mesin 2018.

Downloads

Published

2021-03-17

How to Cite

Irawan, D., & Nudin, B. (2021). PENGARUH DEFLECTOR CHUTE CV. 501 A MENJADI SIZING SCREEN UNTUK PENGOPTIMALAN KINERJA QUADROL CRUSHER DIJALUR UNLOADING SISTEM RCD 3 DI SATUAN KERJA OPERASI PT. BUKIT ASAM TBK, (STUDI KASUS UNIT PELABUHAN TARAHAN). Industrika : Jurnal Ilmiah Teknik Industri, 4(2), 85–99. https://doi.org/10.37090/indstrk.v4i2.232