Perbaikan Tata Letak Zona Lining Menggunakan Metode Activity Relationship Chart (ARC) di PT BSS

Aris Krisdian; Putri Endah Suwarni; Riana Septiani; Susanti Sundari

doi:10.37090/indstrk.v9i3.2590

Authors

Aris Krisdian Universitas Tulang Bawang
Putri Endah Suwarni Universitas Tulang Bawang
Riana Septiani Universitas Tulang Bawang
Susanti Sundari Universitas Tulang Bawang

DOI:

https://doi.org/10.37090/indstrk.v9i3.2590

Abstract

PT BSS is a company engaged in the processing of spices using a make-to-order production system. The main problem faced by the company is the unstructured flow of material movement between the Non-Hygiene, Low Hygiene, High Hygiene, and Disposal zones, which results in inefficiencies in both time and space utilization. Through the ARC approach, supported by the From-To Chart, Activity Relationship Diagram (ARD), Activity Template Block Diagram (ATBD), and Area Allocation Diagram (AAD), an analysis of the inter-activity relationships and a redesign of the production layout were carried out. The results of the study show that the new layout successfully reduced the material handling distance from 600 meters to 430 meters, representing a decrease of 28.3%. In addition, the storage capacity in the Non-Hygiene zone increased from 40 to 63 pallets (an increase of 57.5%) without requiring any building expansion. The new layout also accelerated the average material transfer time by 10–15 minutes per shift and reduced the potential for cross-contamination by up to 70% through stricter separation of zones in accordance with hygiene standards.

Keywords: Activity Relationship Chart (ARC), Facility layout, production efficiency, 5R, zone lining.

Downloads

Download data is not yet available.

References

Apple,J.M. 1990. Tata Letak Pabrik dan Pemindahan Barang. Edisi Tiga.

Andrianto,R. (2018). Perancangan ulang tata letak fasilitas produksi menggunakan metode Activity Relationship Chart di industri sepatu. Jurnal Teknik Industri dan Manufaktur, 5(2), 101–109.

Aisyah, S., & Mahmudah, U. (2021). Evaluasi Tata Letak Fasilitas Produksi pada Industri Makanan Berdasarkan Standar Higiene dan Sanitasi. Jurnal Teknologi dan Industri Pangan, 32(2), 120–130.

Ghosh, S., & Chakraborty, S. (2019). A systematic approach for facility layout optimization using relationship diagrams. Journal of Industrial Engineering International, 15(1), 55–70. https://doi.org/10.1007/s40092-018-0268-1

Heizer, J., Render, B., & Munson, C. (2020). Operations Management (13th ed.). Pearson Education.

Heizer, J., Render, B., & Munson, C. (2017). Operations Management (12th ed.). Pearson Education.

Heragu, S. S. (2020). Facilities Design (5th ed.). CRC Press.

Hafidin, M. N., & Nugraha, P. A. (2023). Perencanaan Tata Letak Pabrik dalam Menunjang Efisiensi Proses Produksi pada UD. Putra Jaya. Jurnal Inovasi Proses dan Produk Industri, 2(1), 1-10.

Hadiguna, R. A., & Yuliawati, E. (2017). Perancangan Tata Letak Pabrik. Penerbit Andi.

Herjanto, E. (2025). Manajemen Operasi. (Edisi Revisi). Grasindo.

Mujtaba, M., Ali, Q., & Sadiq, A. (2019). Facility Layout Optimization in Food Processing Industries: A Lean Manufacturing Perspective. International Journal of Industrial Engineering Research and Development, 10(3), 45–52.

Muter, B. A., & Hu, G. (2020). Activity relationship charts in modern facility layout planning: A review. International Journal of Production Research, 58(11), 1–15. https://doi.org/10.1080/00207543.2020.1730465

Putri, A. L., & Ismanto, D. I. (2019). Perancangan Ulang Tata Letak Pabrik dengan Metode Activity Relationship Chart (ARC) dan Computerized Relative Allocation of Facilities (CRAFT) untuk Meminimasi Jarak dan Waktu Material Handling (Studi Kasus: PT. XYZ). Jurnal Rekayasa Sistem Industri, 8(1), 17-26.

Setyawan, A., & Santoso, R. (2020). Manajemen Operasional. CV. Mitra Abadi

Sutalaksana, I. Z., Ruhana, I., & Tjakraatmadja, J. H. (2018). Teknik Perancangan Sistem Kerja. Bandung: ITB Press.

Sreekanth, K., Varun, S., & Kumar, A. (2019). Systematic layout planning using ARC and AAD techniques for facility layout design. International Journal of Engineering and Advanced Technology (IJEAT), 8(5), 1681–1685. https://doi.org/10.35940/ijeat.E1188.0585C19

Tompkins, J. A., White, J. A., Bozer, Y. A., & Tanchoco, J. M. A. (2010). Facilities Planning. John Wiley & Sons

Muthohar, M., & Ardiansyah, M. N. (2017). Perencanaan Tata Letak Fasilitas Produksi. Deepublish.

Nasution, M. N. (2021). Manajemen Operasi. Jakarta: Ghalia Indonesia

Wignjosoebroto, S. (1996). Ergonomi, Studi Gerak dan Waktu: Teknik Analisis untuk Peningkatan Produktivitas Kerja. Guna Widya.

Wulandari, N., Prasetyo, R., & Kurniawan, T. (2021). Optimalisasi layout area packing menggunakan metode Activity Relationship Chart di industri elektronik. Jurnal Optimasi Sistem Industri, 9(1), 77–86.

Zeki, A. (2014). Perencanaan Tata Letak Pabrik untuk Meningkatkan Efisiensi Produksi. Yogyakarta: Graha Ilmu.