ANALISIS PENGENDALIAN PERSEDIAAN SHEET SPHC DENGAN METODE MIN-MAX STOCK DI PT. INDOTEHNIK CIPTA SEMBADA

Adi Candra; Sofian Bastuti; Muhamad  Abdul Furqon

doi:10.37090/indstrk.v6i2.721

Authors

Adi Candra Universitas Pamulang
Sofian Bastuti Program Studi Teknik Industri, Universitas Pamulang
Muhamad Abdul Furqon Program Studi Teknik Industri, Universitas Pamulang

DOI:

https://doi.org/10.37090/indstrk.v6i2.721

Abstract

Indotehnik Cipta Sembada is a manufacturing company engaged in the design & construction of the Panel Maker electrical system. In an electrical panel, Sheet SPHC (Steel Plate Hotrolled Coiled) is used as the basic material for making box panels. In determining the SPHC Sheet inventory, the company is still based on previous experience, causing frequent stock outs. To help solve the problem of planning raw material requirements, the application of the Min-Max Stock method will assist in meeting the supply of raw materials so that there is no stock out. From this research, it was found that the Safety Stock for 1.5mm SPHC Sheet is 131 sheets and for 2.0mm SPHC Sheet is 151 sheets, the Minimum Stock limit for 1.5mm SPHC Sheet is 106 sheets and for 2.0mm SPHC Sheet is 122 sheets, and the Maximum Stock limit for 1.5mm SPHC Sheets is 213 sheets and for 2.0mm SPHC Sheets is 237 sheets. In addition, in using the Min-Max Stock method the company can save inventory costs, from the calculation results for 1.5mm SPHC Sheet the company can save Rp.2,061,589 and for 2.0mm SheetSPHC Rp.3,240,392.

Keywords: Inventory, EOQ, Min-Max Stock

References

Candra, A., Bastuti, S., Aprilianingsih, C., & Prahasta, T. (2020). Praktikum Perencaan dan Pengendalian Produksi (Issue 1).

Careza Rizky, Yuli Sudarso, S. E. S. (2016). Analisis Perbandingan Metode EOQ dan Metode POQ Dengan Metode Min-Max Dalam Pengendalian Persediaan Bahan Baku Pada PT Sidomuncul Pupuk Nusantara. Admisi Dan Bisnis, 17 No 1(ISSN 1411 – 4321), 11–22.

Huseina, A. F., & Saptadi, S. (2018). PENGENDALIAN PERSEDIAAN RAW MATERIAL METAL DENGAN METODE EOQ Studi Kasus PT DIRGANTARA INDONESIA. Industrial Engineering Online Journal, 2–8. https://ejournal3.undip.ac.id/index.php/ieoj/article/view/22447

Kholidasari, I., Setiawati, L., & Ramanda, R. (2020). Demand Categorization Dan Inventory Management Produk Obat: Studi Kasus Pada Suatu Toko Obat Di Kota Solok, Sumatera Barat. Industrika: Jurnal Ilmiah Teknik Industri, 4(2), 72–77. https://doi.org/10.37090/indstrk.v4i2.227

Kinanthi, A. P., Herlina, D., & Mahardika, F. A. (2016). Analisis Pengendalian Persediaan Bahan Baku Menggunakan Metode Min-Max (Studi Kasus PT.Djitoe Indonesia Tobacco). PERFORMA : Media Ilmiah Teknik Industri, 15(2), 87–92. https://doi.org/10.20961/performa.15.2.9824