Analisis Pengendalian Kualitas Jerrycan Plastik Dengan Metode FTA Dan FMEA Pada Departement Moulding Di PT. PHPO
DOI:
https://doi.org/10.37090/indstrk.v7i1.897Abstract
PT Permata Hijau Palm Oleo (PHPO) is one of the producers in the manufacturing industry that produces plastic jerrycan as cooking oil packaging. At this time, based on the data that researchers obtained during November 2022, the company has jerrycan product quality problems. There were rejects amounting to 21,134 Pcs (3%) of the total production of 637,128 pcs. The types of rejects that occur are reject topload test, droptest, brimfull test, parting line and visual defects. Based on pareto chart analysis, it is obtained that reject topload test with a weight of 42% and reject droptest products with a weight of 32%, therefore an analysis will be carried out to improve the two types of reject products using the fault tree analysis (FTA) method, it is obtained that the root causes of reject topload test and droptest products are influenced by human factors, machines and raw materials. Things that can be done to improve the reject process topload test and droptest using the RPN (Risk Priority Number) value based on FMEA (Failure Mode and Effect Analysis) analysis, namely by cleaning the diehied from the remaining material and performing regular maintenance on the Ellement Heater section to avoid damage so that it will affect the extruder temperature.
Keywords: FMEA, FTA, Jerrycan, Pareto Chart, Quality
References
Anugrah, N. R., Fitria, L., & Desrianty, (2015). Usulan Perbaikan Kualitas Produk Menggunakan Metode Fault Tree Analysis ( Fta ) Dan Failure Mode And Effect Analysis (FMEA) di Pabrik Roti Bariton. Bandung. Itenas 146–157.
Elbert, J., Setyawan, A. B., S, S. B. W., & Mandiri, A. (2019). Calyptra: Jurnal Ilmiah Mahasiswa Universitas Surabaya Vol.7 No.2 (2019). 7(2), 2570–2583.
G. Ghivaris, K. Soemadi, A. D. (2015). Usulan Perbaikan Kualitas Proses Produksi Rudder Tiller Di PT . Pindad Bandung Menggunakan FMEA dan FTA*. Jurnal Online Institut Teknologi Nasional, 3(4), 73–84.
Hasibuan,. A (2022). Pengemasan Minyak Goreng Sawit Curah : Kendala dan Peluang Pengemsan pada Skala Industri Kecil Menenngah. Medan. Warta PPKS 27(2), 114–119.
Ilmiawati,. et al., (2017). Edukasi Pemakaian Plastik Sebagai Kemasan Makanan dan Minuman Serta Resikonya Terhadap Kesehatan Pada Komunitas di Kecamatan Bungus Teluk Kabung.Padang. Universitas Andalas 1(1), 20–28.
Melgandri, S., & Chairani, L. (2021). Analisis Pengendalian Kualitas Pada Proses Produksi Reinf Rr No . 1 Seat Leg RR di PT.XX. Jakarta. Universitas Pancasila 1, 77–85.
Reggy, E., & Djorghi, S. (2021). Analisis Pengendalian Mutu pada Industri Lilin (Study Kasus PD. Ikram Nusa Persada). Sukabumi.Jurnal Inovasi Penelitian. 1(10).
Suliantoro, H., Bakhtiar, A., & Sembiring, J. I. (2016). Analisis Penyebab Kecacatan Dengan Menggunkan Metode Failure Mode And Effect Analysis ( Fmea ) Dan Metode Fault Tree Analysis ( Fta ) di PT . Alam Daya Sakti Semarang. Semarang. Universitas Diponegoro
Widianti, T., & Firdaus, H. (2017). Penilaian Risiko Instansi Pemerintah dengan Fuzzy - Failure Mode and Effect Analysis.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
