Analisis Penyebab Defect Untuk Mencegah Defect Berulang Dengan Metode FMEA Pada Produk Televisi Di PT. FGH

Akhsani  Nur Amalia; Anwar Maulana

doi:10.37090/indstrk.v7i2.913

Authors

Akhsani Nur Amalia Sekolah Tinggi Teknologi Wastukancana
Anwar Maulana Sekolah Tinggi Teknologi Wastukancana

DOI:

https://doi.org/10.37090/indstrk.v7i2.913

Abstract

FGH is a manufacturing company engaged in television assembly. In the process, there is a product defect. In order to avoid repeated defects, this research tries to analyze the factors that cause the current defects. After classification using the Pareto diagram, four types of defects are obtained that need to be repaired immediately. These defects are scratch screens, gaps, light leakage and foreign materials. Further analysis was carried out on each type of defect. With the FMEA method, the results of the analysis show that PT. FGH must check the materials used before the process is carried out, ensure that the work methods are well realized and provide instructions for using tools and machines so that the output is as expected.

Keywords: Analysis, Defect, FMEA, Pareto

References

Afifulloh, A., & Hasbullah, H. (2020). Analisis Peningkatan Tingkat Pengujian Ulang Dalam Proses Uji Laboratorium Produk Tekstil Menggunakan Metode Fmea. Industrika: Jurnal Ilmiah Teknik Industri, 4(1), 1–14. https://doi.org/10.37090/indstrk.v4i1.182

Basori, M., & Supriyadi, S. (2017). Analisis Pengendalian Kualitas Cetakan Packaging Dengan Metode Failure Mode and Effect Analysis (FMEA). Prosiding Seminar Nasional Riset Terapan| SENASSET, 158–163. https://e-jurnal.lppmunsera.org/index.php/senasset/article/view/442

Devani, V., & Wahyuni, F. (2017). Pengendalian Kualitas Kertas Dengan Menggunakan Statistical Process Control di Paper Machine 3. Jurnal Ilmiah Teknik Industri, 15(2), 87. https://doi.org/10.23917/jiti.v15i2.1504

Heizer, J., & Render, B. (2015). Manajemen Operasi (Manajemen Keberlangsungan dan Rantai Pasokan) (11th ed.). Jakarta : Salemba Empat.

MAYANGSARI FITRIA DIANA, ADIANTO HARI, & YUNIATI YOANITA. (2015). Usulan Pengendalian Kualitas Produk Isolator Dengan Metode Failure Mode and Effect Analysis (Fmea)

Dan Fault Tree Analysis (Fta). Teknik Industri Nasional Bandung, 3(2), 81–91.

Melgandri, S., & Chairani, L. (2022). Analisis Pengendalian Kualitas Pada Proses Produksi Reinf Rr No.1 Seat Leg Rr Di Pt Xx. Industrika : Jurnal Ilmiah Teknik Industri, 6(2), 77–85. https://doi.org/10.37090/indstrk.v6i2.653

Nugraha, E., & Sari, R. M. (2019). Analisis Defect dengan Metode Fault Tree Analysis dan Failure Mode Effect Analysis. Organum: Jurnal Saintifik Manajemen Dan Akuntansi, 2(2), 62–72. https://doi.org/10.35138/organum.v2i2.58

Nurholiq, A., Saryono, O., & Setiawan, I. (2019). Analisis Pengendalian Kualitas (Quality Control) Dalam Meningkatkan Kualitas Produk. Jurnal Ekonologi, 6(2), 393–399. https://jurnal.unigal.ac.id/index.php/ekonologi/article/download/2983/2644

Riswan et al., 2017. (2017). Pengendalian Kualitas dengan Metode Failure Mode And Effect Analysis (FMEA) untuk Mengurangi Cacat Produk pada Hasil Produksi Grass Block Lubang Lima (Studi Kasus : PT. Cisangkan-Cijerah). Prosiding Teknik Industri, 3(2), 207–214.

Sirine, H., Kurniawati, E. P., Pengajar, S., Ekonomika, F., Bisnis, D., & Salatiga, U. (2017). PENGENDALIAN KUALITAS MENGGUNAKAN METODE SIX SIGMA (Studi Kasus pada PT Diras Concept Sukoharjo). AJIE-Asian Journal of Innovation and Entrepreneurship, 02(03), 2477–3824. https://www.dirasfurniture.com

Suherman, A., & Cahyana, B. J. (2019). Pengendalian Kualitas dengan Metode Failure Mode Effect And Analysis (FMEA) dan Pendekatan Kaizen untuk Mengurangi Jumlah Kecacatan dan Penyebabnya. Jurnal UMJ, 16, 1–9.

Tannady, H. (2015). Pengendalian Kualitas (1st ed.). Yogyakarta : Graha Ilmu.

Utami, E. A. Y., Moesriati, A., & Karnaningroem, N. (2017). Risiko Kegagalan pada Kualitas Produksi Air Minum Isi Ulang di Kecamatan Sukolilo Surabaya Menggunakan Failure Mode and Effect Analysis (FMEA). Jurnal Teknik ITS, 5(2). https://doi.org/10.12962/j23373539.v5i2.19051