Analisis Dan Usulan Perencanaan Tata Letak Pabrik Bagian Produksi Menggunakan Metode Systematic Layout Planning (SLP) Di PT.ABC
DOI:
https://doi.org/10.37090/indstrk.v7i2.964Abstract
Good factory layout planning is one of the factors that can increase company productivity. Layout is a facility design, layout analysis, concept formation, as well as the embodiment of the system for making goods or services. Applying a good layout in a company can cut the time needed in a production process and also reduce the energy that must be expended by workers. This research was conducted at PT. ABC is part of the Drivetrain Unit Department located in the Bukit Indah City Industrial Area, Purwakarta, West Java. The object to be observed is the layout of the factory for the production of single part trunnion which is devoted to the seat trunnion sub-component. The research method used is quantitative method. Data processing used to solve problems at PT. ABC uses the Systematic Layout Planning (SLP) Method approach. The goal is to be able to optimize the existing layout and increase the efficiency and effectiveness of the productivity of the company's performance. The conclusion is that the current condition of the factory layout is quite effective because it can produce one trunnion product faster than the predetermined takt time. However, there are still some improvements in the layout of the factory and the production process. Researchers try to provide suggestions for the layout of the new factory and its production process. The result is that the suggested layout has a time that is 94 seconds faster than before.
Keywords: Layout, Production, Productivity, Systematic Layout Planning
References
Adiasa, I., Suarantalla, R., Rafi, M. S., & Hermanto, K. (2020). Perancangan Ulang Tata Letak Fasilitas Pabrik Di CV. Apindo Brother Sukses Menggunakan Metode Systematic Layout Planning (SLP). Performa: Media Ilmiah Teknik Industri, 19(2), 151–158. https://doi.org/10.20961/performa. 19.2.43467
Apple, J. M. (1990). Tata Letak Pabrik dan Pemindahan Bahan. Bandung: Institut Teknologi Bandung.
Choir, M., Sofyan Arief, D., Siska, M., Mesin, J. T., Teknik, F., & Riau, U. (2017). DESAIN ULANG TATA LETAK FASILITAS
PRODUKSI MENGGUNAKAN METODE SYSTEMATIC LAYOUT PLANNING PADA PABRIK KELAPA SAWIT SUNGAI PAGAR. In Jom FTEKNIK (Vol. 4).
Hadiguna, R. A., & Setiawan, H. (2008). Tata Letak Pabrik. Yogyakarta: ANDI OFFSET.
Muslim, D., & Ilmaniati, A. (2018). Usulan Perbaikan Tata Letak Fasilitas Terhadap Optimalisasi Jarak dan Ongkos Material Handling Dengan Pendekatan Systematic layout planning (SLP) di PT Transplant Indonesia. Jurnal Media Teknik Dan Sistem Industri, 2(1), 45. https://doi.org/10.35194/jmtsi.v2i1.327
Nathaniel. (n.d.). Usulan Perbaikan Tata Letak Pabrik dan Material Handling pada PT. XYZ I Wayan Sukania, Silvi Ariyanti dan Nathaniel.
Purnomo, H. (2004). Perencanaan dan Perancangan Fasilitas. Yogyakarta: Graha Ilmu.
Rosyidi, Moh. R. (2018). Analisa Tata Letak Fasilitas Produksi Dengan Metode Arc, Ard, Dan Aad Di Pt. Xyz. WAKTU: Jurnal Teknik UNIPA, 16(1), 82–95. https://doi.org/10.36456/waktu.v16i1.1493
Safitri1, N. D., Ilmi2, Z., & Kadafi, M. A. (2017). Analisis perancangan tataletak fasilitas produksi menggunakan metode activity relationship chart (ARC). 9(1), 38–47.
Saputra, B., Arifin, Z., & Merjani, A. (2020). Juli 2020 IMPROVEMENT OF FACILITY LAYOUT USING SYSTEMATIC LAYOUT PLANNING ( SLP ) METHOD TO REDUCE MATERIAL MOVEMENT DISTANCE ( CASE STUDY AT UKM KERUPUK KAROMAH ) E-ISSN 2598-9987 Identifikasi Masalah Tujuan Penelitian Sesuai dengan perumusan masalah ter. 8(1).
Sutalaksana, I. Z Anggawirasastra, R. T. (2006). Teknik Perancangan Sistem Kerja. Bandung: Institut Teknologi Bandung.
Wignjosoebroto, S. (2000). Tata Letak Pabrik dan Pemindahan Bahan (Edisi keti). Surabaya: Guna Widya.
Wignjosoebroto, S. (2009). Tata Letak Pabrik dan Pemindahan Bahan (Edisi Ketiga). Surabaya: Guna Widya.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
