ANALISIS PENGENDALIAN KUALITAS PADA PROSES PRODUKSI REINF RR NO.1 SEAT LEG RR DI PT XX
DOI:
https://doi.org/10.37090/indstrk.v6i2.653Keywords:
SQC, Normality Test, Control Chart, CP, CpkAbstract
PT. XX. is a company engaged in the automotive sector, precisely in the production of metal components, always prioritizing and trying to create products with high quality, but in the process until now, reject products are still found both during the production process and after passing inspection, while zero defects become standard in the production process. Based on data obtained from August to November 2021, part number 57835-0K020 is the product with the highest rejects. In this study, quality improvement efforts were carried out using the Statistical Quality Control (SQC) method. Several methods used in this research include normality test of data with Kolmogorov Smirnov, Pareto diagram, np control chart and process capability. The results of this study are the observation data is normally distributed, the weld porous is the dominant type of defect, the control chart is statistically controlled, and the Cp index is around 0.83 and the Cpk is around 0.77 so it can be concluded that the process does not have a good capability.
Keywords: SQC, Normality Test, Control Chart, CP, Cpk
References
Andespa, I. (2020). Analisis Pengendalian Mutu Dengan Menggunakan Statistical Quality Control (Sqc) Pada Pt.Pratama Abadi Industri (Jx) Sukabumi. E-Jurnal Ekonomi Dan Bisnis Universitas Udayana, 2, 129. https://doi.org/10.24843/eeb.2020.v09.i02.p02.
Astuti, F., & Wahyudin, W. (2021). Perbaikan Kualitas Pada Produksi Gentong Menggunakan Metode Seven Tools (Studi Kasus : Home Industry Bapak Ojid). Barometer, 6(1), 307–312. https://doi.org/10.35261/barometer.v6i1.4444
Hidayat, R. S. (2019). Analisis Pengendalian Kualitas Dengan Metode Statistical Process Control (Spc) Dalam Upaya Mengurangi Tingkat Kecacatan Produk Pada Pt. Gaya Pantes Semestama. Journal of Management, 3(3), 379–387. http://jurnal.unigal.ac.id/index.php/managementreviewdoi:http://dx.doi.org/10.25157/mr.v3i3.
Jaware, A., Bhandare, K., Sonawane, G., & Bhagat, S. (2018). Seven Quality Tools a Review. International Research Journal of Engineering and Technology, 5(5), 2796–2798. www.irjet.net
Nurholiq, A., Saryono, O., & Setiawan, I. (2019). Analisis Pengendalian Kualitas (Quality Control) Dalam Meningkatkan Kualitas Produk. Jurnal Ekonologi, 6(2), 393–399. https://jurnal.unigal.ac.id/index.php/ekonologi/article/download/2983/2644
Nuryadi, Tutut Dewi Astuti, Endang Sri Utami, & Martinus Budiantara. (2017). Dasar-Dasar Statistika Penelitian. http://lppm.mercubuana-yogya.ac.id/wp-content/uploads/2017/05/Buku-Ajar_Dasar-Dasar-Statistik-Penelitian.pdf
Rimantho, D., & Athiyah. (2019). Analisis Kapabilitas Proses Untuk Pengendalian Kualitas Air Limbah di Industri Farmasi. Jurnal Teknologi, 11(1), 1–8.
Sari, N. K. R., & Purnawati, N. K. (2018). Analisis Pengendalian Kualitas Proses Produksi Pie Susu Pada Perusahaan Pie Susu Barong Di Kota Denpasar. E-Jurnal Manajemen Unud, 7(3), 1566–1594.
Sihombing, M. I. S., & Sumartini, S. (2017). Pengaruh Pengendalian Kualitas Bahan Baku dan Pengendalian Kualitas Proses Produksi terhadap Kuantitas Produk Cacat dan Dampaknya pada Biaya Kualitas (Cost of Quality). Jurnal Ilmu Manajemen Dan Bisnis, 8(2), 42. https://doi.org/10.17509/jimb.v8i2.12665.
Wirawati, S. M. (2019). Analisis pengendalian kualitas kemasan botol plastik dengan metode Statistical Process Control (SPC) di PT. Sinar Sosro KPB Pandeglang. Jurnal Intent, 2(1), 94–102.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
